Sash (V7)
A feature of the 7.0 Rulebook
Contents
From the text; Garb rule 12 on page 14.
For the purpose of determining what class people are playing, class sashes must run diagonally across the chest from one shoulder to the opposite hip. They must be at least two inches wide. You may not wear sashes for classes you are not currently playing.
Listing of classes and their sashes
| Class | Sash |
|---|---|
| Anti-Paladin (V7) | No sash, Black Phoenix |
| Archer (V7) | Orange |
| Assassin (V7) | Black |
| Barbarian (V7) | Leather or Fur |
| Bard (V7) | 'Bardic Blue' |
| Druid (V7) | Brown |
| Healer (V7) | Red |
| Monk (V7) | Grey |
| Paladin (V7) | No sash, White Phoenix |
| Peasant (V7) | No sash, no Garb |
| Reeve (V7) | Gold |
| Scout (V7) | Green |
| Warrior (V7) | Purple |
| Wizard (V7) | Yellow |
Monsters
- Centaur (V7) - Green
How to
Since we use these things all the time now, roughly every weekend, you should probably make yourself and your buddies some.
Materials:
Broadcloth is the most commonly used fabric, but feel free to get fancy. You will need a stripe at least 180 long.
Instructions
Cut a strip of fabric about 2 yds (1.8 m) long as shown in Diagram 1. To determine how wide the strip needs to be, multiply your desired finished belt/scarf width by two and add 0.5" (13 mm).
Note: Alternatively, you can cut the fabric on the bias. With 44" (1.1 m) wide fabric, you can make a bias sash about 60" (1.5 m) long before having to add a seam.
Fold the fabric strip in half lengthwise with right sides together and cut the ends at an angle, as shown in Diagram 2.
With a 0.25" (6 mm) seam allowance, sew the raw edges together along both angled ends and along the length of the fabric, leaving an opening of about 4" (10 cm), as shown in Diagram 3.
Trim the seam allowances at each corner, turn the sash right side out, and press.
Finish by either (a) slipstitching the opening closed or (b) topstitching close to edge along all four sides of the sash.
