V9: Equipment Inspection Guide

This page is part of the Official Amtgard V9 Alpha-Playtest Rulebook.

• The Amtwiki is the official home and primary source for Amtgard V9 Rules as of February 25, 2023.
• These rules are currently in Open Alpha Playtest. See the Playtest Disclaimer for more details.
• To learn more about Amtgard V9 Development, please visit Amtgard.com.
• To view the current Amtgard V8 ruleset, please see the Amtgard V8 Rulebook.

---

Equipment Inspection Guide

Equipment Inspection

Each piece of equipment must pass an inspection before its use each day to ensure the Universal Equipment Requirements of safety, durability, recognizability, and any other type-specific construction standards are met.

Guidance for Equipment Inspectors can be found in the Equipment Inspection Guide. The following information is the essential knowledge that all players should have:

1. Equipment is inspected by an Equipment Inspector. Since equipment inspection is mandatory, this task is often a listed responsibility of one or more Officer positions, traditionally the Champion and/or Guildmaster of Reeves.
2. All inspectors are highly encouraged to follow the Equipment Inspection Guide.
3. All weapon inspections must include volunteer-assisted Hit Testing.
4. Equipment that does not pass inspection cannot be used in combat. Using uninspected or unapproved equipment on the battlefield is grounds for immediate suspension from play.
5. Equipment may be reinspected throughout the day as necessary.
6. New or inexperienced players wishing to use a weapon type they have never used before must also demonstrate Weapon Competency to ensure safe use on the battlefield. Players who demonstrate unsafe weapon use during this demonstration or at any point thereafter may have those weapon privileges revoked by a Rules Authority.

Inspections Do Not Guarantee Safety Passing an equipment inspection does not guarantee that a piece of equipment is 100% safe. Players should always remain vigilant for potential hazards and equipment being used in an unsafe manner.

---

Items You Will Need

• A copy of the Amtgard V9 Rules of Play
• A tape measure (minimum 12ft)
• 2.5” and 2” inner diameter rings (or equivalent templates)
• A Draw Weight Scale or Luggage Scale
• Hit-Test Volunteers (At least one other person)
  • Either you or your volunteer must be willing to be struck and shot to assess weapon safety.
  • Either you or your must be able to safely fire an arrow.
• Designated areas to place passed, failed, and unchecked equipment.
• [OPTIONAL] Colored Cloth or Flagging tape to directly mark equipment that has passed and/or failed.

---

General Guidelines

1. Equipment must be inspected in an unbiased manner. If you feel you can’t assess something objectively, ask someone else to help.


2. Check the equipment for safety and rules adherence in an efficient and orderly manner.


3. Memorize the rules or create cheat sheets to speed up the process. Inspection becomes much more efficient the more you can commit to memory. That said, don’t hesitate to create cheat sheets, reference the rulebook directly, or even ask another player for help if you’re unsure about something. Never make blind guesses during inspections.


4. Don’t damage or destroy equipment to during an inspection. When inspecting foam, use the pads of the fingers or the palm of the hand. Don’t dig in with nails or fingertips.


5. Don’t be afraid to get a second opinion, especially for items that you feel are on the edge of passing or failing.

---

Hit Testing Guidelines

All weapons must pass a Hit Test prior to their first use and periodically thereafter. Hit Tests help inspectors assess how it feels to be struck by the weapon in a controlled environment before it is allowed to be used in the uncontrolled chaos of an normal battle.

1. A good benchmark for Hit Test failure is if there is significant residual pain for at least ten seconds after impact, or if the volunteer refuses to be struck by that weapon again.


2. Be careful not to strike sensitive areas such as the groin, kidneys, or sternum during the Hit Test, however you must consider that these locations may still be struck by the weapon during the course of typical combat.


3. Rotate your Hit Test volunteers, figuratively and literally. After a while of being struck in the same location, any hit will start to feel painful. Have your volunteers take hits in different locations and bring in new volunteers when the previous ones need to take a break from being struck.


4. If a Hit test fails, consider retesting it with another volunteer. If it fails a second time (or there are no willing volunteers), then you can confidently fail the weapon.


5. Remember that any weapon being assessed is a weapon that is intended for use on the battlefield. If no one wants to be hit with it in a controlled situation, then it should probably not be allowed to strike players in the uncontrolled chaos of battle.


6. Occasionally you will come across weapons that appear to be on the border between passable and not. You may not feel perfectly comfortable allowing the weapon, but you also don't feel completely right disallowing it either. If a second opinion is unable to help make a confident decision either way, the weapon should be flagged as a potential hazard in a way that can be referenced during the course of the day (You can use different colored marking tape, or even a logbook!). This way, should an issue or complaint arise in regard to a flagged weapon, then it becomes an easy decision to immediately pull it from use.
   • Note: This should not be used as a license to allow actual hazardous weapons on field. Safety should still be your number one concern. Clearly hazardous or unsafe weapons should never be approved for use.

Step-by-Step Equipment Inspection Checklists

Melee Weapons

1. Look at the weapon. Is it easily recognizable as the type of weapon it is trying to be and not easily confused for something else? Is it visually suitable for the theme and setting of Amtgard (Heroic Fantasy)?


2. Measure the total length and all Padding proportions. Confirm the weapon classification and ensure all padding requirements are met. Ensure any substitutions for Stab-Only, Heavy Padding, or Super Heavy Padding are accurate. Reference the weapon construction section for specific details as necessary.


3. Inspect each Striking Tip. Check for stability and that the core cannot be felt. Ensure the foam is adequate to provide noticeable cushioning when used to stab a player. Check the 2.5-inch rule.


4. Using the pads of the fingers, move up and down the weapon checking for weak spots, excessive wear, or any indication that foam has been damaged or come loose.


5. Assess all Incidental Padding. Ensure there are no unpadded areas that could reasonably come into contact another playing during combat. Inspect any padded areas covered with a non-abrasive coating (rubber, silicone, etc). It must not compromise the purpose of the padding, such as by making it too firm.


6. Inspect the Non-Striking Tips. Check for stability. No core should be felt. Check the 2-inch rule.


7. Make sure the cover is in good repair and foam is not exposed.


8. Check to ensure that all strike-legal surfaces are clearly distinct from any non-striking surfaces.


9. Assess the flex of the weapon. Flex is tested by holding the weapon low on the handle for maximum length and striking a shield or padded surface. Test with a light, medium, and reasonably heavy strike. A second person can estimate the flex.


10. Perform Hit Test with a volunteer. Refer to the guidelines Hit Testing at the start of this section.
1. For slashing weapons, test a slash against your own leg to assess impact. If acceptable, check against the back of a volunteer - assess a light and medium force swing. With permission from your volunteer, test a hard swing that could reasonably occur on field.
2. Test a stab against your own thigh to assess impact. If acceptable, check against the back of a volunteer. Test one-handed, then one-hand with off-hand to stabilize, then two-handed. Assess light and medium force stabs for each method. With permission from your volunteer, test a hard two-handed stab that could reasonably occur on field. Make sure the tip does not deflect or fold over excessively when stabbing and always returns to its original position.

Flail-Specific Checks

Same as All Melee, with the following extra checks:

1. Inspect the head. It should be entirely strike-legal and not contain a rigid core.


2. Ensure no more than 0.5” of exposed rope/cloth between each foam segment along the chain.


3. To check the required dimensions, put the handle between your legs and pull on the flail-head to gently stretch the chain portion taught. Have a second person help measure if necessary.


4. Flails do not need to be Stab tested.

Madu-Specific Checks

Same as All Melee, with the following extra checks:

1. Ensure any weapon segments are easily recognizable as weapons, and the shield portion is easily recognizable as a shield. The division between weapon and shield segments must be visually distinct.


2. Ensure the weapon and shield are securely affixed together in a way that is not dangerous or unwieldy.
   • Inspect connection points between the weapon and shield for any indication that they might become separated by the forces placed upon them during combat.
   • Ensure weapon segments are not extending from the face of the shield (or anything similar).
   • Ensure there are no articulations or flail-like chains.
   • Ensure the weapon segments are not mimicking, extending, or otherwise offering similar protective coverage to that of a shield. If this is a case, the offending segments will count as part of the shield, not a weapon, and should be inspected as such.

Javelin-Specific Checks

Same as All Melee, with the following extra checks:

1. Ensure the core is straight with at most one Striking Tip per end.


2. Perform a Ranged Hit Test in addition to the Melee Hit Test. Refer to the Tips for Hit Testing at the start of this section.
1. Throw against your own leg to assess impact. If acceptable, check against the back of a volunteer from 20’ away - assess a light and medium force throw. With permission from your volunteer, test a strong throw that could reasonably occur on field. Consider how it would feel to be accidentally struck in the face with this weapon.

---

Contact Projectiles

1. Look at the weapon. Is it easily recognizable as the type of weapon it is trying to be and not easily confused for something else? Is it visually suitable for the theme and setting of Amtgard (Heroic Fantasy)?


2. Measure the total length and all Padding proportions. Confirm the weapon classification and ensure all padding requirements are met. Reference the weapon construction section for specific details as necessary.


3. Using the pads of the fingers, move up and down the weapon checking for weak spots, excessive wear, or any indication that foam has been damaged or come loose.


4. Confirm the center mass or structural core is appropriate for contact projectiles.


5. Make sure the cover or cloth tape is in good repair and foam is not exposed. If cloth tape was used, make sure it is not curling, hardening, or otherwise becoming sharp or abrasive.


6. Ensure any necessary Color Coding is appropriate. The necessary symbols should match the associated Color Code and be large and visible in relation to the item.


7. Confirm the owner’s name and ensure name labels are present, easy to find, and readable.


8. Use rings or templates to check the 2.5” rule across all surfaces and tips.


9. Perform Hit Testing with a volunteer. Refer to the Tips for Hit Testing at the start of this section.
1. Throw against your own leg to assess impact. If acceptable, check against the back of a volunteer from 20’ away - assess a light and medium force throw. With permission from your volunteer, test a strong throw that could reasonably occur on field. Consider how it would feel to be accidentally struck in the face with this weapon.

---

Arrows & Bolts

When possible, arrow and bolt inspection should be aided by someone with knowledge and experience of safe arrow use and construction. Arrows and bolts are the most potentially dangerous aspect of our game and they should be treated as such during inspections.

1. Before checking anything else, confirm with the owner that any real arrowheads or hunting tips have been removed. You must be 100% sure of this. If you believe there is any chance of a real arrowhead inside an arrow, you cannot allow it to be used in any way at an Amtgard function.


2. Look at the weapon. Is it easily recognizable as the type of weapon it is trying to be and not easily confused for something else? Is it visually suitable for the theme and setting of Amtgard (Heroic Fantasy)?


3. Measure the total length and all padding proportions. Confirm all construction requirements are met. Reference the weapon construction section for specific details as necessary.


4. Arrow shafts longer than 28” must have a draw-stop around the shaft physically preventing drawing the arrow past 28".


5. Ensure shafts are free of cracks, bends, or splits.


6. Ensure any vanes/fletching and nock are in good repair. Vanes and fletchings (or the lack thereof) must not cause chaotic or unpredictable flight during Hit Testing/


7. Ensure the head has an appropriate amount of open-cell foam and that it is dense enough to provide noticeable cushioning when used to strike a player. Check for degrading foam and ensure the core or blunt cannot be felt when pressing down against the face with an open palm.


8. Ensure the head has the required amount of 2.5" circular cross-section, then check the 2.5-inch rule against the tip.


9. Using the pads of the fingers, move around the face and sides of the head checking for weak spots, excessive wear, or any indication the foam has broken apart or come loose.


10. Make sure the cover is in good repair and foam is not exposed.


11. Ensure any necessary Color Coding is appropriate. The necessary symbols should match the associated Color Code and be large and visible in relation to the item. Arrows & Bolts without Color Coding should not be easily mistaken as having a Color Code.


12. If any tape was used, make sure it is not curling, hardening, or otherwise becoming sharp or abrasive.


13. Confirm the owner’s name and ensure name labels are present, easy to find, and readable.


14. Inspect the head for stability. The head must not be able to move easily in relation to the arrow shaft. This movement includes but is not limited to: twisting without return, plunging up and down, wobbling from side to side, etc.


15. If the head is modular (built separately from the shaft and attached afterwards), ensure that it is firmly affixed to the shaft and cannot twist out or become detached during combat.


16. Perform Hit Testing with a volunteer and a competent archer. Refer to the Tips for Hit Testing at the start of this section.
1. You may ask the owner to fire their own arrows or bolts.
2. For arrows, use a bow that has a draw weight of 35lbs at a 28” draw if possible.
3. For crossbows, use a crossbow that is rated at 450 inch-pounds if possible.
4. Shoot at the back of a volunteer from a distance of 20’. The volunteer should not be able to see the arrows or bolts being fired. For safety, they should have one hand covering the back of the neck, and the other hand covering the kidneys.
5. Check in with your volunteer after each shot. Do not fire again until they give a signal to do so.
6. Check for excessive bounce-back. Excessive bounce-back is the arrow or bolt hitting the volunteer and bouncing back 20’ or more in any direction.

---

Bows & Crossbows

When possible, bow and crossbow inspection should be aided by someone with knowledge and experience with that type of item. Archery is the most potentially dangerous aspect of our game and it should be treated as such during inspections.

Bows and Crossbows must be strung before being brought to inspection. Equipment Inspectors are not responsible for stringing other players’ bows or crossbows.

1. Look at the weapon. Is it easily recognizable as the type of weapon it is trying to be and not easily confused for something else? Is it visually suitable for the theme and setting of Amtgard (Heroic Fantasy)?


2. Check to ensure no cracks or excessive warping of limbs.


3. Ensure there are no excessive protrusions such as stabilizers.


4. Vertical Bows must have a draw weight of 35lbs or less at a 28” draw.


5. Crossbows are limited to no more than 450 inch-pounds.

Shields

1. Look at the shield. Is it easily recognizable as a shield and not easily confused for something else? Is it visually suitable for the theme and setting of Amtgard (Heroic Fantasy)?


2. Assess the size to confirm the size category. A shield’s size is determined by the surface area of its largest silhouette, measured on a flat plane. It's height and width, when necessary, are based on the same silhouette. Reference the shield construction section for specific details.


3. Due to the complexity of some shield shapes, some measurements may be unable to empirically confirm in a timely manner. In these cases, confer with the owner or crafter (if present) and make your best judgment. Ask if they have an [[V9: Equipment Reference Sheet} equipment reference sheet]], however this should never be required to get a shield approved.

Ensure all rigid or sharp-edged hardware are filed down or padded, and any hard edges are not exposed on any surface which can reasonably come into contact with another player or their equipment.

For shield sizes that require them, ensure there is a distinct handle. The handle should be securely fastened.

Ensure any straps are secure.

Inspect any visible core for cracks, breaks, or splits.

Confirm that it cannot bend excessively when attempting to bring opposite edges together.

Check the face of the shield. Ensure padding is stable and attached. Padding should wrap around the rigid edges of the core, if present. It should be impossible to feel or strike the user’s hand from the front when being held in the intended method.

Any curves or recesses in the shield should not be deeper than half its width.

The face of the shield may not have open holes that penetrate its silhouette.

Ensure the cover is opaque, durable, and in good repair. Any non-abrasive coating applied (rubber, silicone, etc.) must not compromise the purpose of the padding, such as by making it too firm.

Perform Hit Testing using a volunteer.

1. Have a volunteer hold the shield in the intended manner by its handle or straps.
2. Slash the shield with light and medium strikes. Slash around the edges from different angles. With permission from your volunteer, test a few hard swings that could reasonably occur on the field.
3. Stab the shield with light and medium stabs. Stab closer to the outer edges. With permission from your volunteer, test a few hard swings that could reasonably occur on field, especially those that could tilt the shield while it is being held.
4. A shield should fail if the expected impacts from combat could easily cause injury to the wielder, such as a handle or strap that might force their arm or hand to twist dangerously when struck a certain way.

Armor

This is a guide for safety inspection. See Rating Armor to determine Armor Points.

1. Armor should be worn to be checked.
2. Ensure all corners that do not deform under contact are penny round (3/8” radius).
3. Ensure there are no protruding edges. No spikes, thin ridges, or sharp edges which could damage equipment or players in the normal course of combat.
4. Inspect chain armor. Check for broken or separated links which could catch on equipment or players in the normal course of combat.
5. Inspect surfaces, joints, and articulations for any risk of catching fingers.
6. Assess all plates and rigid surfaces to ensure they are not brittle or able to deform easily.

Step-By-Step Equipment Competency Checklists

Anyone wishing to use a bow or crossbow must demonstrate to the equipment inspector that they are able to do so safely.

1. When possible, this inspection should be aided by someone with knowledge and experience of bow and crossbow use, as appropriate. Archery is the most potentially dangerous aspect of our game and it should be treated as such during inspections.
2. In the absence of a someone with experience, the following guide will help an uneducated inspector administer a basic competency check:

Developer Note: Waiting to consult with our expert bow and crossbow users.