V9: Armor

This page is part of the Official Amtgard V9 Alpha-Playtest Rulebook.

• The Amtwiki is the official home and primary source for Amtgard V9 Rules as of February 25, 2023.
• These rules are currently in Open Alpha Playtest. See the Playtest Disclaimer for more details.
• To learn more about Amtgard V9 Development, please visit Amtgard.com.
• To view the current Amtgard V8 ruleset, please see the Amtgard V8 Rulebook.

---

Armor

Rating Armor & Calculating Armor Point Totals

Rating Armor Pieces

Each piece of Physical Armor must be inspected and given an Armor Rating in order to be used for Amtgard combat.

1. Physical Armor pieces must be examined and rated by an Equipment Inspector.
2. Each piece of physical armor will be assigned to an Armor Tier based on its style that will outline its Base Armor Rating and Maximum Armor Rating. Armor that cannot be assigned to a tier does not count as armor and cannot be used as such.
3. Pieces can be granted bonuses or penalties based on the quality of construction or appearance.
   • The sum total of all modifiers cannot increase a piece's armor rating beyond the maxiumum allowable for its tier. Surplus bonuses confer no additional benefit.
   • Armor with a final rating of zero or less (due to penalties) does not count as Armor and cannot be used as such.
4. Armor Pieces are rated individually but will be averaged together when worn to produce an Armor Point Total for each Hit Location.

PRO TIP: EQUIPMENT REFERENCE SHEETS
Armor rating can be subjective at times. To help mitigate this, it is recommended that players keep a reference sheet with a list of details for their physical armor pieces including descriptions, construction details, and previously assigned ratings to help Inspectors make quick and confident assessments. Keeping signatures and inspection dates from other Inspectors will add further credibility to your notes.

Reference Sheets are not necessary but they will greatly improve your odds of getting consistent armor ratings at every event you attend!

---

Armor Tiers

Armor tiers provide a base and maximum rating for physical armor pieces. Each tier includes a list of common styles that fall under that tier. Ambiguous armor pieces should be placed wherever they would be most appropriate.

ARMOR TIERS
TIER	BASE RATING	MAX RATING	INCLUDES
T1	1	2	Cloth/Padded
T2	2	3	Light Leather & Synthetic Variants Butcher's Mail, Sharkmail, and similar.
T3	3	4	Heavy Leather & Synthetic Variants Rigid Non-Metal Armor Chainmail
T4	4	5	Light Scale
T5	5	6	Heavy Scale Butted Plate (Splint, Kikko, etc.)
T6	6	7	Lamellar, Laminar Brigandine Plate
Special	-	-	Ambiguous Armor

---

Armor Modifiers

Armor pieces can be granted bonuses or penalties to their Armor Rating based on the quality of construction or appearance. Multiple points can be awarded and penalized simultaneously as long as they each correspond to each unique feature or collection of features that would warrant the bonus or penalty if viewed on its own.

Superior Appearance
Bonus points may be awarded to armor that displays an exceptional appearance above and beyond the typical appearance of similar pieces in its style. This includes but is not limited to: tooling, etching, gilding, and fluting, as well as notable use of colors, shapes, weaves, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base construction requirements to create an aesthetically pleasing piece.

Inferior Appearance
Points may be deducted from armor that displays an appearance well below the typical standard expected for similar pieces in that style. Examples include tarnished/poorly-maintained armor as well as visibly inauthentic or degraded materials. This penalty does not apply when the piece is worn as a part of a complete outfit that is intentionally designed to look shoddy or battle-worn.

Superior Construction
Bonus points may be awarded to armor constructed with exceptional techniques that provide a meaningful increase in durability over the standard for the material being used. This includes but is not limited to: solid/riveted rings, hardened material, noticeably tighter spacing than required, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base requirements to create a more durable piece. This bonus may also be granted to pieces that are at least 75% constructed from metal materials that are significantly more dense and/or durable than aluminum.

Inferior Construction
Points may be deducted from armor for inferior construction techniques or a meaningful reduction in expected durability when compared to the standard for the material being used. Examples include but are not limited to: obviously unfinished armor, brittle/cracked material, loose connection points, and shoddy workmanship.

Layered Armor Bonus
If multiple unique pieces of Physical Armor are layered on top of each other as part of a complete outfit, the rating of any overlapping area will be rating of the highest-tier armor piece plus 1, up to that armor’s maximum.

1. A piece of armor already at max rating will not receive any additional value from layering.
2. Each layered piece should be able to act as armor on its own if it were not layered. The layers may be affixed while being worn, such as metal armor attached to an arming doublet.
3. Any part of layered armor that extends beyond the layering is calculated at its normal rating.
4. All layered armor pieces must be at least partially visible in a way that does not misrepresent the wearer’s armor point total or armor coverage when observed by another player from 20ft away. This especially true in the cases where a lower-tier armor is layered on top of a higher-tier piece.
5. There is no additional bonus for layering more than two pieces.

Material Thickness

Certain armor styles may require materials that meet a specific thickness. Multiple layers of material may permanently affixed to each other to increase thickness however extra thickness caused by adhesives or empty space should not be factored into the new measurements.

• One bonus point may be awarded or deducted for Superior or Inferior thickness according to the chart below.
• Armor pieces that do not meet these minimum requirements may be judged as Ambiguous Armor as long as they still meet the universal equipment requirements.

MATERIAL THICKNESS REFERENCE CHART
	Inferior (Minimum)		Standard		Superior		Notes
Cloth	Cannot be less than standard		1/16" 1.60mm		1/8" 3.18mm
Light Leather	4oz 1/16" 1.60mm		6oz 3/32" 2.39mm		8oz 1/8" 3.18mm
Heavy Leather	Cannot be less than standard		10oz 5/32" 3.96mm		12oz 3/16" 4.78mm		Less than standard is Light Leather
Rigid, Non-Metal	1/8" 3.18mm		3/16" 4.78mm		1/4" 6.36mm		Material Density at least 0.9g/cm3 (equivalent to HDPE)
	Aluminum	Steel	Aluminum	Steel	Aluminum	Steel
Round Rings	18ga swg 16ga awg 0.048" 1.219mm	20ga swg 18ga awg 0.036" 0.914mm	16ga swg 14ga awg 0.064" 1.626mm	18ga swg 16ga awg 0.048" 1.219mm	14ga swg 12ga awg 0.080" 2.032mm	16ga swg 14ga awg 0.064" 1.626mm
Flat Rings	20ga swg 18ga awg 0.036" 0.914mm	22ga swg 20ga awg 0.028" 0.711mm	18ga swg 16ga awg 0.048" 1.219mm	20ga swg 18ga awg 0.036" 0.914mm	16ga swg 14ga awg 0.064" 1.626mm	18ga swg 16ga awg 0.048" 1.219mm	Measure along thinnest axis. Punched rings should be comparable thickness.
Sheet Metal	18ga 0.040" 1.024mm	20ga 0.036" 0.911mm	16ga 0.051" 1.291mm	18ga 0.048" 1.214mm	14ga 0.064" 1.628mm	16ga 0.060 1.518mm
Scales	20ga 0.032" 0.812mm	22ga 0.030" 0.759mm	18ga 0.040" 1.024mm	20ga 0.036" 0.911mm	16ga 0.051" 1.291mm	18ga 0.048" 1.214mm

---

Supplemental Armor Bonus

Player with Supplemental Armor

When calculating a player's Armor Point Total, armor worn on the head (above the neck), hands (above the wrist), or feet (below the ankle) do not contribute a normal rating towards calculations. Instead, pieces that meet the construction criteria below grant an additional +1 bonus to their respective location (torso, right arm, left arm, right leg, left leg) after all Armor Point Totals have been calculated.

1. Supplemental armor pieces must cover at least 50% of the surface area of the head, hand, or foot, not including space between fingers and toes.
2. They meet the Universal Equipment Requirements, as well as be constructed in a way that would place them in Tier 3 or greater.
   • To ensure safety in the cases of accidental hand contact, hand armor cannot include metal or similarly rigid materials on the tops of knuckles or fingers, including fingertips. To offset this, Hand Armor can also be constructed as a Tier 2 armor so long as the final piece still looks like armor.
3. This bonus can cause the armor point total to exceed tier maximums, however it will still be affected by armor point limits imposed by class or game modes.
4. If hand or foot armor is the only armor piece worn on that location, then it should be compared to the normal armor tiers and assigned a normal rating as best as possible.

---

Calculating Armor Point Totals

Once the pieces are rated, Armor Point Totals are calculated for each Hit Location based on those ratings and the approximate physical coverage that each piece bestows.

To calculate this total, average the ratings of all physical armor pieces in the hit location based on the percentage of coverage they provide, rounding the result to the nearest whole number.

• Areas not covered by any armor whatsoever, such as gaps or garb, are not factored into this averaging.
• You do not need to be precise when determining the coverage. "Eyeballing" it is perfectly fine and is even encouraged as long as it is done in good faith.

Once the point total has been calculated, any extra points from Supplemental Armor should be added.

Example: Padded Bracer, Chainmail Sleeve, and Gauntlets.

Lorathana is wearing a cloth bracer (rated 2pts) on her right forearm, a chainmail tunic (rated 4pts) with sleeves covering some of her arms, and a leather gauntlet. The two pieces together cover about 70% of her arms, leaving a gap at the elbow.

To make their calculations, the Equipment Inspector only has to focus on the area covered by armor. Looking at her arm, they determine that the bracer takes up about 40% of the armored area and the chainmail sleeve takes up about 60% of the armored area. The Gauntlets are Supplemental Armor so they are ignored until later.

[Bracer] 2pts x 40% = 2 x 0.40 = 0.8
[Sleeve] 4pts x 60% = 4 x 0.60 = 2.4
0.8 + 2.4 = 3.2 rounds down to 3.

Now that the total has been calculated, Lorathana can add the Supplemental Armor bonus for her Gauntlets, granting an additional +1.

Therefore, Lorathana’s right arm has an Armor Point Total of 4pts in the areas covered by armor (the bracer, the sleeve, and the gauntlets) and an exposed gap between them.

Still confused? More examples can be found here.