V9: Armor

This page is part of the Official Amtgard V9 Alpha-Playtest Rulebook.

• The Amtwiki is the official home and primary source for Amtgard V9 Rules as of February 25, 2023.
• These rules are currently in Open Alpha Playtest. See the Playtest Disclaimer for more details.
• To learn more about Amtgard V9 Development, please visit Amtgard.com.
• To view the current Amtgard V8 ruleset, please see the Amtgard V8 Rulebook.

---

Armor

Rating Armor & Calculating Armor Point Totals

Rating Armor Pieces

Each piece of Physical Armor must be inspected and given an Armor Rating in order to be used for Amtgard combat.

1. Physical Armor pieces must be examined and rated by an Equipment Inspector.
2. Each piece of physical armor will be assigned to an Armor Tier based on its style that will outline its Base Armor Rating and Maximum Armor Rating. Armor that cannot be assigned to a tier does not count as armor and cannot be used as such.
3. Pieces can be granted bonuses or penalties based on the quality of construction or appearance.
   • The sum total of all modifiers cannot increase a piece's armor rating beyond the maxiumum allowable for its tier. Surplus bonuses confer no additional benefit.
   • Armor with a final rating of zero or less (due to penalties) does not count as Armor and cannot be used as such.
4. Armor Pieces are rated individually but will be averaged together when worn to produce an Armor Point Total for each Hit Location.

PRO TIP: EQUIPMENT REFERENCE SHEETS
Armor rating can be subjective at times. To help mitigate this, it is recommended that players keep a reference sheet with a list of details for their physical armor pieces including descriptions, construction details, and previously assigned ratings to help Inspectors make quick and confident assessments. Keeping signatures and inspection dates from other Inspectors will add further credibility to your notes.

Reference Sheets are not necessary but they will greatly improve your odds of getting consistent armor ratings at every event you attend!

---

Armor Tiers

Armor tiers provide a base and maximum rating for physical armor pieces. Each tier includes a list of common styles that fall under that tier. Ambiguous armor pieces should be placed wherever they would be most appropriate.

ARMOR TIERS
TIER	BASE RATING	MAX RATING	INCLUDES
T1	1	2	Cloth/Padded
T2	2	3	Light Leather & Synthetic Variants Butcher's Mail, Sharkmail, and similar.
T3	3	4	Heavy Leather & Synthetic Variants Rigid Non-Metal Armor Chainmail
T4	4	5	Light Scale
T5	5	6	Heavy Scale Butted Plate (Splint, Kikko, etc.)
T6	6	7	Lamellar, Laminar Brigandine Plate
Special	-	-	Ambiguous Armor

---

Armor Modifiers

Armor pieces can be granted bonuses or penalties to their Armor Rating based on the quality of construction or appearance. Multiple points can be awarded and penalized simultaneously as long as they each correspond to each unique feature or collection of features that would warrant the bonus or penalty if viewed on its own.

Superior Appearance
Bonus points may be awarded to armor that displays an exceptional appearance above and beyond the typical appearance of similar pieces in its style. This includes but is not limited to: tooling, etching, gilding, and fluting, as well as notable use of colors, shapes, weaves, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base construction requirements to create an aesthetically pleasing piece.

Inferior Appearance
Points may be deducted from armor that displays an appearance well below the typical standard expected for similar pieces in that style. Examples include tarnished/poorly-maintained armor as well as visibly inauthentic or degraded materials. This penalty does not apply when the piece is worn as a part of a complete outfit that is intentionally designed to look shoddy or battle-worn.

Superior Construction
Bonus points may be awarded to armor constructed with exceptional techniques that provide a meaningful increase in durability over the standard for the material being used. This includes but is not limited to: solid/riveted rings, hardened material, noticeably tighter spacing than required, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base requirements to create a more durable piece. This bonus may also be granted to pieces that are at least 75% constructed from metal materials that are significantly more dense and/or durable than aluminum.

Inferior Construction
Points may be deducted from armor for inferior construction techniques or a meaningful reduction in expected durability when compared to the standard for the material being used. Examples include but are not limited to: obviously unfinished armor, brittle/cracked material, loose connection points, and shoddy workmanship.

Layered Armor Bonus
If multiple unique pieces of Physical Armor are layered on top of each other as part of a complete outfit, the rating of any overlapping area will be rating of the highest-tier armor piece plus 1, up to that armor’s maximum.

1. A piece of armor already at max rating will not receive any additional value from layering.
2. Each layered piece should be able to act as armor on its own if it were not layered. The layers may be affixed while being worn, such as metal armor attached to an arming doublet.
3. Any part of layered armor that extends beyond the layering is calculated at its normal rating.
4. All layered armor pieces must be at least partially visible in a way that does not misrepresent the wearer’s armor point total or armor coverage when observed by another player from 20ft away. This especially true in the cases where a lower-tier armor is layered on top of a higher-tier piece.
5. There is no additional bonus for layering more than two pieces.

Material Thickness

Certain armor styles may require materials that meet a specific thickness. Multiple layers of material may permanently affixed to each other to increase thickness however extra thickness caused by adhesives or empty space should not be factored into the new measurements.

• One bonus point may be awarded or deducted for Superior or Inferior thickness according to the chart below.
• Armor pieces that do not meet these minimum requirements may be judged as Ambiguous Armor as long as they still meet the universal equipment requirements.

MATERIAL THICKNESS REFERENCE CHART
	Inferior (Minimum)		Standard		Superior		Notes
Cloth	Cannot be less than standard		1/16" 1.60mm		1/8" 3.18mm
Light Leather	4oz 1/16" 1.60mm		6oz 3/32" 2.39mm		8oz 1/8" 3.18mm
Heavy Leather	Cannot be less than standard		10oz 5/32" 3.96mm		12oz 3/16" 4.78mm		Less than standard is Light Leather
Rigid, Non-Metal	1/8" 3.18mm		3/16" 4.78mm		1/4" 6.36mm		Material Density at least 0.9g/cm3 (equivalent to HDPE)
	Aluminum	Steel	Aluminum	Steel	Aluminum	Steel
Round Rings	18ga swg 16ga awg 0.048" 1.219mm	20ga swg 18ga awg 0.036" 0.914mm	16ga swg 14ga awg 0.064" 1.626mm	18ga swg 16ga awg 0.048" 1.219mm	14ga swg 12ga awg 0.080" 2.032mm	16ga swg 14ga awg 0.064" 1.626mm
Flat Rings	20ga swg 18ga awg 0.036" 0.914mm	22ga swg 20ga awg 0.028" 0.711mm	18ga swg 16ga awg 0.048" 1.219mm	20ga swg 18ga awg 0.036" 0.914mm	16ga swg 14ga awg 0.064" 1.626mm	18ga swg 16ga awg 0.048" 1.219mm	Measure along thinnest axis. Punched rings should be comparable thickness.
Sheet Metal	18ga 0.040" 1.024mm	20ga 0.036" 0.911mm	16ga 0.051" 1.291mm	18ga 0.048" 1.214mm	14ga 0.064" 1.628mm	16ga 0.060 1.518mm
Scales	20ga 0.032" 0.812mm	22ga 0.030" 0.759mm	18ga 0.040" 1.024mm	20ga 0.036" 0.911mm	16ga 0.051" 1.291mm	18ga 0.048" 1.214mm

---

Supplemental Armor Bonus

Player with Supplemental Armor

When calculating a player's Armor Point Total, armor worn on the head (above the neck), hands (above the wrist), or feet (below the ankle) do not contribute a normal rating towards calculations. Instead, pieces that meet the construction criteria below grant an additional +1 bonus to their respective location (torso, right arm, left arm, right leg, left leg) after all Armor Point Totals have been calculated.

1. Supplemental armor pieces must cover at least 50% of the surface area of the head, hand, or foot, not including space between fingers and toes.
2. They meet the Universal Equipment Requirements, as well as be constructed in a way that would place them in Tier 3 or greater.
   • To ensure safety in the cases of accidental hand contact, hand armor cannot include metal or similarly rigid materials on the tops of knuckles or fingers, including fingertips. To offset this, Hand Armor can also be constructed as a Tier 2 armor so long as the final piece still looks like armor.
3. This bonus can cause the armor point total to exceed tier maximums, however it will still be affected by armor point limits imposed by class or game modes.
4. If hand or foot armor is the only armor piece worn on that location, then it should be compared to the normal armor tiers and assigned a normal rating as best as possible.

---

Calculating Armor Point Totals

Once the pieces are rated, Armor Point Totals are calculated for each Hit Location based on those ratings and the approximate physical coverage that each piece bestows.

To calculate this total, average the ratings of all physical armor pieces in the hit location based on the percentage of coverage they provide, rounding the result to the nearest whole number.

• Areas not covered by any armor whatsoever, such as gaps or garb, are not factored into this averaging.
• You do not need to be precise when determining the coverage. "Eyeballing" it is perfectly fine and is even encouraged as long as it is done in good faith.

Once the point total has been calculated, any extra points from Supplemental Armor should be added.

Example: Padded Bracer, Chainmail Sleeve, and Gauntlets.

Lorathana is wearing a cloth bracer (rated 2pts) on her right forearm, a chainmail tunic (rated 4pts) with sleeves covering some of her arms, and a leather gauntlet. The two pieces together cover about 70% of her arms, leaving a gap at the elbow.

To make their calculations, the Equipment Inspector only has to focus on the area covered by armor. Looking at her arm, they determine that the bracer takes up about 40% of the armored area and the chainmail sleeve takes up about 60% of the armored area. The Gauntlets are Supplemental Armor so they are ignored until later.

[Bracer] 2pts x 40% = 2 x 0.40 = 0.8
[Sleeve] 4pts x 60% = 4 x 0.60 = 2.4
0.8 + 2.4 = 3.2 rounds down to 3.

Now that the total has been calculated, Lorathana can add the Supplemental Armor bonus for her Gauntlets, granting an additional +1.

Therefore, Lorathana’s right arm has an Armor Point Total of 4pts in the areas covered by armor (the bracer, the sleeve, and the gauntlets) and an exposed gap between them.

Still confused? More examples can be found here.

Armor Styles

Each Armor Tier includes a list of common Armor Styles that fall under that tier. Those styles are presented here in greater detail to help players and inspectors more accurately assess their armor. Ambiguous armor pieces should be assessed on a case-by-case basis.

ARMOR TIERS
TIER	BASE RATING	MAX RATING	INCLUDES
T1	1	2	Cloth/Padded
T2	2	3	Light Leather & Synthetic Variants Butcher's Mail, Sharkmail, and similar.
T3	3	4	Heavy Leather & Synthetic Variants Rigid Non-Metal Armor Chainmail
T4	4	5	Light Scale
T5	5	6	Heavy Scale Butted Plate (Splint, Kikko, etc.)
T6	6	7	Lamellar, Laminar Brigandine Plate
Special	-	-	Ambiguous Armor

---

Cloth/Padded Armor

Placeholder Example

This style includes armor made of fabric, padding, and/or synthetic equivalents.

• Is a Tier 1 armor style.
• Must meet the Universal Equipment Requirements.
• Minimum Material Thickness of 1/16" (1.60mm)

Light Leather

Placeholder Example

This style includes armor made of thin leather, hides, furs and their synthetic equivalents.

• Is a Tier 2 armor style.
• Must meet the Universal Equipment Requirements.
• The standard Material Thickness is 6oz (3/32") (2.39mm).

Butcher's Mail, Sharkmail, etc

Placeholder Example

This style includes armor composed of machine-made weaves of very small rings.

• Is a Tier 2 armor style.
• Must meet the Universal Equipment Requirements.
• Only welded Butcher's Mail, Sharkmail, Ringmesh, or similar chain mesh may be used. Because of this, there are no specific Material Thickness requirements or modifiers.
• Any weave is permitted but it must not allow a 1/8" dowel to pass through
• Does not gain a bonus for being made from Steel or similar metal.

Heavy Leather

Placeholder Example

This style includes armor made of thick leather, hides, furs and their synthetic equivalents.

• Is a Tier 3 armor style.
• Must meet the Universal Equipment Requirements.
• The standard Material Thickness is 10oz (5/32") (3.96mm).

Rigid Non-Metal Armor

Placeholder Example

This style includes all predominantly rigid non-metal armor that would fall under Tiers 4/5/6 if they were made from metal.

• Is a Tier 3 armor style.
• Must meet the Universal Equipment Requirements.
• Must meet the requirements for the tier/style it is mimicking, other than material thickness.
• Material density must be at least 0.9g/cm3 (equivalent to HDPE).
• The standard Material Thickness is 3/16" (4.78mm).

Chainmail

Placeholder Example

This style includes flexible armor consisting of a weave of interlocked metal rings.

• Is a Tier 3 armor style.
• Must meet the Universal Equipment Requirements.
• Any weave is permitted but it must not allow a 1/2" dowel to pass through.
• Rings must have Aspect Ratio (AR) of 8 or less.
• Metal must be at least equivalent to Aluminum in density and durability. (2.7g/cm3)
• The standard Material Thickness for rings is based on the metal used:
  • Aluminum Round Rings: 16ga swg (0.064") (1.626mm)
  • Aluminum Flat Rings: 18ga swg (0.048") (1.219mm)
  • Steel Round Rings: 18ga swg (0.048") (1.219mm)
  • Steel Flat Rings: 20ga swg (0.036") (0.914mm)

Light Scale

Placeholder Example

This style includes armor created with overlapping scales secured to each other along one edge using rings or a flexible backing. Scales are individually mobile and are not held into firm contact with the others. Scale armor with rigid or immobile scales is classified as Heavy Scale.

• Is a Tier 4 armor style.
• Must meet the Universal Equipment Requirements.
• Scales must overlap by at least 10%.
• Any backing material must not be visible through the scales.
• Scales must be a metal at least equivalent to Aluminum in density and durability. (2.7g/cm3)
• The standard for Material Thickness is based on the metal used:
  • Aluminum Scales: 18ga (0.040") (1.024mm)
  • Steel Scales: 20ga (0.036") (0.911mm)
  • For rings and backing materials, consult the Material Thickness chart.

Heavy Scale

Placeholder Example

This style includes armor created with overlapping scales secured to each other along one edge against a backing to create a rigid shell rather than individually mobile scales. Scale armor with loose scales is classified as Light Scale.

• Is a Tier 5 armor style.
• Must meet the Universal Equipment Requirements.
• Scales must overlap by at least 10%.
• The backing material must not be visible through the scales.
• Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
• The standard for Material Thickness is based on the metal used:
  • Aluminum Scales: 18ga (0.040") (1.024mm)
  • Steel Scales: 20ga (0.036") (0.911mm)
  • For rings and backing materials, consult the Material Thickness chart.

Butted Plate (Splint, Kikko, etc.)

Placeholder Example

This style includes armor that consists of numerous metal plates attached to a backing or linked by cord, chain, or by some other method. This armor is often flexible with numerous seams and joints between plates. This armor will deform locally when struck rather than spreading out impact over a large area

• Is a Tier 5 armor style.
• Must meet the Universal Equipment Requirements.
• Plates spaced no more than 0.5" apart.
• Plates must cover at least 75% of the armor.
• Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
• The standard for Material Thickness is based on the metal used:
  • Aluminum Plates: 16ga (0.051") (1.291mm)
  • Steel Plates: 18ga (0.048") (1.214mm)
  • For rings and backing materials, consult the Material Thickness chart.

Lamellar and Laminar

Placeholder Example

This style includes armor that is constructed from numerous metal plates, connected to each other in an overlapping fashion by cord, chain link, or similar methods. Examples may include lorica segmentata, manica, okegawa-dō, anima, and other styles. Unlike Heavy Scale, the plates of this type of armor are firmly connected to each other. Mobility is provided by the small amount of flex and slack in the attachment between the individual plates.

• Is a Tier 6 armor style.
• Must meet the Universal Equipment Requirements.
• Plates must overlap by at least 10%.
• Plates connect directly to each other without any backing for support.
• Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
• The standard for Material Thickness is based on the metal used:
  • Aluminum Plates: 16ga (0.051") (1.291mm)
  • Steel Plates: 18ga (0.048") (1.214mm)

Brigandine

Placeholder Example

This style includes armor that is constructed from numerous shaped and fitted metal plates solidly connected along a supporting shell of heavy cloth (such as canvas, denim, or velvet) in such a way that when worn all plates are held together firmly and follow the general contours of the body. The plates are typically placed on the inside of the shell, presenting only fabric and rivets to the observer for a very clean and customizable appearance.

• Is a Tier 6 armor style.
• Must meet the Universal Equipment Requirements.
• 75% of plates must overlap by at least 10% of their surface.
• Plates need only be attached along one edge but must be held firmly against each other when the armor is worn.
• Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
• The standard for Material Thickness is based on the metal used:
  • Aluminum Plates: 16ga (0.051") (1.291mm)
  • Steel Plates: 18ga (0.048") (1.214mm)

Plate

Placeholder Example

This style includes armor is constructed from large pieces of metal connected together to form a solid shell that spreads impact over a large surface area. Plate armor will not deform locally when struck, and will instead behave as a single contiguous whole. The individual metal pieces are shaped and fitted to articulate together and follow the contours of the body.

• Is a Tier 6 armor style.
• Must meet the Universal Equipment Requirements.
• 75% of the plates used must be large enough to cover at least 10% of the full Hit Location. Joint articulations are exempt from this requirement.
• Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
• The standard for Material Thickness is based on the metal used:
  • Aluminum Plates: 16ga (0.051") (1.291mm)
  • Steel Plates: 18ga (0.048") (1.214mm)

Ambiguous Armor

Placeholder Example

For armor pieces that are ambiguous, the equipment inspector should compare it to each tier as a whole and do their best assign to the tier they feel is most appropriate based on factors such as materials, weight, flexibility, and visuals (see guide below).

• Inspectors should reference similar styles and materials to help gauge what bonuses or penalties may be appropriate.
• Ambiguous Armor must still meet the Universal Equipment Requirements.

Below is a simple guide that inspectors may use to gauge the best tier for an ambiguous piece of armor. Use this knowledge alongside existing styles to help place the armor in a tier that is fair for everyone.

1. Non-Metal Tier Cap: Non-metal armors should not be placed higher than Tier 3, regardless of the factors below.
2. Weight: Heavier armor should be placed higher, but only to a limit. The lowest tier armors are quilted cloth (0.03 lbs/sqft) and the highest tier armors are 14ga aluminum plate (approx. 1 lbs/sqft). Extra weight beyond these bounds should receive no additional consideration, however steel-like materials may receive a separate construction bonus afterwards. Weight added for no reason other than to add weight should likewise be disregarded.
3. Flexibility: The more rigid the armor is, the higher it should be placed. The lowest tier armors are fabric and the highest tier armors are reinforced metal plates.
4. Tiebreaker - Visuals: If there is difficulty deciding between two tiers, visual appearance can act as a tiebreaker to nudge the decision one way or the other.
5. Helpful Benchmarks: Consider using these benchmarks to help peg an initial placement and then fine tune it using the other criteria above.
   • Ambiguous armor that meets the universal equipment requirements is always eligible for Tier 1 at minimum.
   • Ambiguous armor that is primarily rigid and non-metal should be placed roughly around Tier 2 or Tier 3.
   • Ambiguous armor that is primarily metal and primarily rigid should be placed roughly around Tier 4 or Tier 5.

Note to Players: Buying or crafting ambiguous armor pieces can make your ratings inconsistent. To help mitigate this, consider keeping an Equipment Reference Sheet to help inspectors view previously assigned ratings so they can make quick and confident assessments. Keeping signatures and inspection dates from other Inspectors will add further credibility and stability to your ratings.