Difference between revisions of "V9: Armor Rating Modifiers"

From AmtWiki
m (Transcluded Material Thickness in)
 
(22 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
{{V9}}
+
{{V9}}<onlyinclude>=====<u><big>[[V9: Armor Rating Modifiers| Armor Modifiers]]</big></u>=====
−
<onlyinclude>=====<u><big>[[V9: Armor Rating Modifiers| Armor Modifiers]]</big></u>=====
+
[[V9: Physical Armor|Armor pieces]] can be granted bonuses or penalties to their [[V9: Rating Armor|Armor Rating]] based on the quality of construction or appearance. Multiple points can be awarded and penalized simultaneously as long as they each correspond to each unique feature or collection of features that would warrant the bonus or penalty if viewed on its own.
 +
 
 
<u>'''Superior Appearance'''</u><br>
 
<u>'''Superior Appearance'''</u><br>
−
Bonus points may be awarded to [[V9: Worn Armor|armor]] that displays an exceptional appearance above and beyond the typical appearance of similar pieces in its [[V9: Armor Styles|style]]. This includes but is not limited to: tooling, etching, gilding, and fluting, as well as notable use of colors, shapes, weaves, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base construction requirements to create an aesthetically pleasing piece.
+
Bonus points may be awarded to armor that displays an exceptional appearance above and beyond the typical appearance of similar pieces in its [[V9: Armor Styles|style]]. This includes but is not limited to: tooling, etching, gilding, and fluting, as well as notable use of colors, shapes, weaves, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base construction requirements to create an aesthetically pleasing piece.
  
 
<u>'''Inferior Appearance'''</u><br>
 
<u>'''Inferior Appearance'''</u><br>
−
Points may be deducted from armor that displays an appearance well below the typical standard expected for similar pieces in that [[V9: Armor Styles|style]]. Examples include tarnished/poorly-maintained armor as well as visibly inauthentic or degrading materials. This penalty does not apply when the piece is worn as a part of a complete [[V9: Garb|outfit]] that is intentionally designed to look shoddy or battle-worn.
+
Points may be deducted from armor that displays an appearance well below the typical standard expected for similar pieces in that [[V9: Armor Styles|style]]. Examples include tarnished/poorly-maintained armor as well as visibly inauthentic or degraded materials. This penalty does not apply when the piece is worn as a part of a complete [[V9: Garb|outfit]] that is intentionally designed to look shoddy or battle-worn.
  
 
<u>'''Superior Construction'''</u><br>
 
<u>'''Superior Construction'''</u><br>
−
Bonus points may be awarded to armor constructed with exceptional techniques that provide a meaningful increase in durability over the standards for the material being used. This includes but is not limited to: solid/riveted rings, hardened material, tighter spacing than required, greater overlap than required, etc. This bonus may also be granted to pieces that are at least 75% steel or equivalent metal. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base requirements to create a more durable piece.
+
Bonus points may be awarded to armor constructed with exceptional techniques that provide a meaningful increase in durability over the standard for the material being used. This includes but is not limited to: solid/riveted rings, hardened material, noticeably tighter spacing than required, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base requirements to create a more durable piece. This bonus may also be granted to pieces that are at least 75% constructed from metal materials that are significantly more dense and/or durable than aluminum.
  
 
<u>'''Inferior Construction'''</u><br>
 
<u>'''Inferior Construction'''</u><br>
−
Points may be deducted from armor for inferior construction or a meaningful reduction in expected durability when compared to the standards for the material being used. Examples include but are not limited to: obviously unfinished armor, brittle/cracked material, loose connection points, and shoddy workmanship.
+
Points may be deducted from armor for inferior construction techniques or a meaningful reduction in expected durability when compared to the standard for the material being used. Examples include but are not limited to: obviously unfinished armor, brittle/cracked material, loose connection points, and shoddy workmanship.
−
 
 
−
<u>'''Material Thickness'''</u><br>
 
−
Each piece of worn armor must include certain materials that meet a specific thickness criteria to qualify as a valid armor. Multiple layers of material may permanently affixed to each other to increase thickness however extra thickness caused by adhesives or empty space should not be factored into the new measurements. One bonus point may be awarded or deducted for Superior or Inferior thickness according to the chart below.
 
  
 
<u>'''Layered Armor Bonus'''</u><br>
 
<u>'''Layered Armor Bonus'''</u><br>
−
When calculating the Armor Point Total, if multiple pieces of [[V9: Worn Armor| Worn Armor]] are layered on top of each other, the rating of any layered/overlapping areas will be rating of the highest-tier piece plus 1, up to that tier’s max.
+
If multiple unique pieces of [[V9: Physical Armor| Physical Armor]] are layered on top of each other as part of a complete outfit, the rating of any overlapping area will be rating of the highest-tier armor piece plus 1, up to that armor’s maximum.
 
#A piece of armor already at max rating will not receive any additional value from layering.
 
#A piece of armor already at max rating will not receive any additional value from layering.
−
#Each layered piece must be able to act as armor on its own if it were not layered. Any part of layered armor that extends beyond the layering is calculated as its normal rating. There is no additional bonus for layering more than two pieces.
+
#Each layered piece should be able to act as armor on its own if it were not layered. The layers may be affixed while being worn, such as metal armor attached to an arming doublet.
−
#All layered armor pieces must be at least partially visible in a way that [[V9: Honor System|does not misrepresent]] the wearer’s armor point total or armor coverage when observed by another player from 20ft away. This especially true in the cases where a lower-tier armor is layered on top of a higher-tier piece.<br><br>
+
#Any part of layered armor that extends beyond the layering is calculated at its normal rating.
 +
#All layered armor pieces must be at least partially visible in a way that [[V9: Honor System|does not misrepresent]] the wearer’s armor point total or armor coverage when observed by another player from 20ft away. This especially true in the cases where a lower-tier armor is layered on top of a higher-tier piece.
 +
#There is no additional bonus for layering more than two pieces.
 +
 
  
−
<center>
+
{{:V9: Material Thickness}}
−
{|style="border-style: solid; border-width: 5px; text-align: center" class="wikitable"
 
−
!colspan="8"|MATERIAL THICKNESS REFERENCE CHART
 
−
|-
 
−
! Material || colspan="2" | Inferior<br>(Minimum) || colspan="2" | Standard || colspan="2" | Superior || Notes
 
−
|-
 
−
| '''Catch-All''' || colspan="2" rowspan="2"  style="background-color:#FAEBD7" | Cannot be less<br>than standard  || colspan="2" rowspan="2" style="background-color:#F0F8FF" | '''1/16"'''<br>1.60mm || colspan="2" rowspan="2" style="background-color:#F0FFF0" | '''1/8"'''<br>3.18mm
 
−
|-
 
−
| '''Cloth'''
 
−
|-
 
−
| '''Light Leather''' || colspan="2" style="background-color:#FAEBD7"| '''4oz'''<br>1/16"<br>1.60mm  || colspan="2" style="background-color:#F0F8FF"| '''6oz'''<br>3/32"<br>2.39mm || colspan="2" style="background-color:#F0FFF0"| '''8oz'''<br>1/8"<br>3.18mm
 
−
|-
 
−
| '''Strong Leather''' || colspan="2" style="background-color:#FAEBD7"| '''10oz'''<br>5/32"<br>3.96mm || colspan="2" style="background-color:#F0F8FF"| '''12oz'''<br>3/16"<br>4.78mm || colspan="2" style="background-color:#F0FFF0"| '''14oz'''<br>7/32"<br>5.57mm
 
−
|-
 
−
| '''Rigid, Non-Metal''' || colspan="2" style="background-color:#FAEBD7"| '''1/8"'''<br>3.18mm || colspan="2" style="background-color:#F0F8FF"| '''3/16"'''<br>4.78mm || colspan="2" style="background-color:#F0FFF0"| '''1/4"'''<br>6.36mm || Material Density<br>at least 0.9g/cm3<br>(equivalent to HDPE)
 
−
|-
 
−
! || Aluminum || Steel || Aluminum || Steel || Aluminum || Steel ||
 
−
|-
 
−
| '''Round Rings''' ||  colspan="2" rowspan="2" style="background-color:#FAEBD7"| Cannot be less<br>than standard ||style="background-color:#F0F8FF"| '''16awg'''<br>0.051"<br>1.290mm ||style="background-color:#F0F8FF"| '''18awg'''<br>0.040"<br>1.024mm ||style="background-color:#F0FFF0"| '''14awg'''<br>0.064"<br>1.628mm||style="background-color:#F0FFF0"| '''16awg'''<br>0.051"<br>1.290mm
 
−
|-
 
−
| '''Flat Rings''' || rowspan="2" style="background-color:#F0F8FF"| '''16ga'''<br>0.051"<br>1.291mm || rowspan="2" style="background-color:#F0F8FF"| '''18ga'''<br>0.048"<br>1.214mm || rowspan="2" style="background-color:#F0FFF0"| '''14ga'''<br>0.064"<br>1.628mm || rowspan="2" style="background-color:#F0FFF0"| '''16ga'''<br>0.060<br>1.518mm || Measure along<br>thinnest axis
 
−
|-
 
−
| '''Sheet Metal''' || style="background-color:#FAEBD7"| '''18ga'''<br>0.403"<br>1.024mm || style="background-color:#FAEBD7"| '''20ga'''<br>0.036"<br>0.911mm
 
−
|-
 
−
| '''Scales''' || style="background-color:#FAEBD7"| '''20ga'''<br>0.032"<br>0.812mm || style="background-color:#FAEBD7"| '''22ga'''<br>0.030"<br>0.759mm ||style="background-color:#F0F8FF"| '''18ga'''<br>0.040"<br>1.024mm ||style="background-color:#F0F8FF"| '''20ga'''<br>0.036"<br>0.911mm ||style="background-color:#F0FFF0"| '''16ga'''<br>0.051"<br>1.291mm ||style="background-color:#F0FFF0"| '''18ga'''<br>0.048"<br>1.214mm
 
−
|}</center>
 
 
</onlyinclude><br><br>
 
</onlyinclude><br><br>
 
{{V9 Rating Armor}}
 
{{V9 Rating Armor}}

Latest revision as of 06:06, 8 February 2024

221202---V9-Rules-Seal-for-Wiki.png
This page is part of the Official Amtgard V9 Alpha-Playtest Rulebook.
  • The Amtwiki is the official home and primary source for Amtgard V9 Rules as of February 25, 2023.
  • These rules are currently in Open Alpha Playtest. See the Playtest Disclaimer for more details.
  • To learn more about Amtgard V9 Development, please visit Amtgard.com.
  • To view the current Amtgard V8 ruleset, please see the Amtgard V8 Rulebook.




Armor Modifiers

Armor pieces can be granted bonuses or penalties to their Armor Rating based on the quality of construction or appearance. Multiple points can be awarded and penalized simultaneously as long as they each correspond to each unique feature or collection of features that would warrant the bonus or penalty if viewed on its own.

Superior Appearance
Bonus points may be awarded to armor that displays an exceptional appearance above and beyond the typical appearance of similar pieces in its style. This includes but is not limited to: tooling, etching, gilding, and fluting, as well as notable use of colors, shapes, weaves, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base construction requirements to create an aesthetically pleasing piece.

Inferior Appearance
Points may be deducted from armor that displays an appearance well below the typical standard expected for similar pieces in that style. Examples include tarnished/poorly-maintained armor as well as visibly inauthentic or degraded materials. This penalty does not apply when the piece is worn as a part of a complete outfit that is intentionally designed to look shoddy or battle-worn.

Superior Construction
Bonus points may be awarded to armor constructed with exceptional techniques that provide a meaningful increase in durability over the standard for the material being used. This includes but is not limited to: solid/riveted rings, hardened material, noticeably tighter spacing than required, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base requirements to create a more durable piece. This bonus may also be granted to pieces that are at least 75% constructed from metal materials that are significantly more dense and/or durable than aluminum.

Inferior Construction
Points may be deducted from armor for inferior construction techniques or a meaningful reduction in expected durability when compared to the standard for the material being used. Examples include but are not limited to: obviously unfinished armor, brittle/cracked material, loose connection points, and shoddy workmanship.

Layered Armor Bonus
If multiple unique pieces of Physical Armor are layered on top of each other as part of a complete outfit, the rating of any overlapping area will be rating of the highest-tier armor piece plus 1, up to that armor’s maximum.

  1. A piece of armor already at max rating will not receive any additional value from layering.
  2. Each layered piece should be able to act as armor on its own if it were not layered. The layers may be affixed while being worn, such as metal armor attached to an arming doublet.
  3. Any part of layered armor that extends beyond the layering is calculated at its normal rating.
  4. All layered armor pieces must be at least partially visible in a way that does not misrepresent the wearer’s armor point total or armor coverage when observed by another player from 20ft away. This especially true in the cases where a lower-tier armor is layered on top of a higher-tier piece.
  5. There is no additional bonus for layering more than two pieces.


Material Thickness

Certain armor styles may require materials that meet a specific thickness. Multiple layers of material may permanently affixed to each other to increase thickness however extra thickness caused by adhesives or empty space should not be factored into the new measurements.


MATERIAL THICKNESS REFERENCE CHART
Inferior
(Minimum)		 Standard Superior Notes
Cloth Cannot be less
than standard		 1/16"
1.60mm		 1/8"
3.18mm
Light Leather 4oz
1/16"
1.60mm		 6oz
3/32"
2.39mm		 8oz
1/8"
3.18mm
Heavy Leather Cannot be less
than standard		 10oz
5/32"
3.96mm		 12oz
3/16"
4.78mm		 Less than standard
is Light Leather
Rigid, Non-Metal 1/8"
3.18mm		 3/16"
4.78mm		 1/4"
6.36mm		 Material Density
at least 0.9g/cm3
(equivalent to HDPE)
Aluminum Steel Aluminum Steel Aluminum Steel
Round Rings 18ga swg
16ga awg
0.048"
1.219mm		 20ga swg
18ga awg
0.036"
0.914mm		 16ga swg
14ga awg
0.064"
1.626mm		 18ga swg
16ga awg
0.048"
1.219mm		 14ga swg
12ga awg
0.080"
2.032mm		 16ga swg
14ga awg
0.064"
1.626mm
Flat Rings 20ga swg
18ga awg
0.036"
0.914mm		 22ga swg
20ga awg
0.028"
0.711mm		 18ga swg
16ga awg
0.048"
1.219mm		 20ga swg
18ga awg
0.036"
0.914mm		 16ga swg
14ga awg
0.064"
1.626mm		 18ga swg
16ga awg
0.048"
1.219mm		 Measure along thinnest axis.

Punched rings should be comparable thickness.
Sheet Metal 18ga
0.040"
1.024mm		 20ga
0.036"
0.911mm		 16ga
0.051"
1.291mm		 18ga
0.048"
1.214mm		 14ga
0.064"
1.628mm		 16ga
0.060
1.518mm
Scales 20ga
0.032"
0.812mm		 22ga
0.030"
0.759mm		 18ga
0.040"
1.024mm		 20ga
0.036"
0.911mm		 16ga
0.051"
1.291mm		 18ga
0.048"
1.214mm



Rating Armor & Calculating Points
Armor Tiers · Armor Rating Modifiers · Material Thickness · Supplemental Armor · Calculating Armor Point Totals
Physical Armor
Gameplay Rules · Construction Rules · Rating Armor & Calculating Armor Points · Armor Styles
Armor
General Rules · Natural Armor · Physical Armor
Equipment
Equipment Basics · Equipment Use Terms · Weapons · Shields · Armor · Color Code · Visual Indicators
Amtgard V9 Rulebook
Playtest Disclaimer · Introduction · Getting Started · Garb · Honor System · Safety · Core Combat Rules · Equipment · Classes · Abilities and Effects · Magic Items · Combat Activities · Rules Authorities
Appendix: Equipment Inspection Guide · Master List of Abilities · Glossary
Retrieved from "https://wiki.amtgard.com/index.php?title=V9:_Armor_Rating_Modifiers&oldid=258817"