Difference between revisions of "V9: Physical Armor"

From AmtWiki
m
m (removed extra line breaks)
 
(34 intermediate revisions by 3 users not shown)
Line 2: Line 2:
 
__TOC__
 
__TOC__
 
<onlyinclude><div class="toccolours mw-collapsible">
 
<onlyinclude><div class="toccolours mw-collapsible">
===<u>'''[[V9: Worn Armor| Worn Armor]]</u>'''===
+
===<u><big>'''[[V9: Physical Armor| Physical Armor]]</big></u>'''===
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
  
 
<div class="toccolours mw-collapsible">
 
<div class="toccolours mw-collapsible">
====<u>General Rules</u>====
+
====<u><big>Gameplay Rules</big></u>====
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
Worn Armor is represented on a player by actual pieces of physical armor worn by the player. Each piece is given an individual [[V9: Rating Armor| Armor Rating]] and then the [[V9: Hit Location| Hit Location]] is assigned its [[V9: Armor Point| Armor Point]] value based on the ratings of the different pieces covering it.
+
<ol><li>Physical Armor is represented on a player by actual pieces [[V9: Armor|armor]] [[V9: Worn|worn]] by the player.</li>
 +
<li>Each physical piece is inspected and given an individual [[V9: Rating Armor| Armor Rating]] which is used to calculate the armor point total for each [[V9: Hit Location| Hit Location]].</li>
 +
<li>The maximum amount of armor points a [[V9: Hit Location| Hit Location]] can ever receive from [[V9: Physical Armor| Physical Armor]] is six (6). Some [[V9: Classes| Classes]] will limit this amount further.
 +
*Limits are only applied after armor point totals are fully calculated. Armor Ratings higher than 6 may be used to benefit averaging calculations before the limit is applied.
 +
{{V9 Example|text=''Example: Ariq is playing a class which has a maximum armor point total of 4pts. He is wearing armor pieces that average to 6 points on his torso, 2 points on his arms, and 1 point on his legs. Since his class has an armor limit of 4 points, Ariq's torso armor is reduced to 4 points for the duration of that game and his arm and leg values remain unchanged.}}</li>
 +
<li>When [[V9: Worn|worn]], armor pieces must be at least partially visible in a way that [[V9: Honor System|does not misrepresent]] the wearer’s potential armor point totals and/or coverage.</li>
 +
<li>If it is necessary to add or remove pieces of physical armor after a game has started, new armor point totals should be recalculated and adjusted as soon as reasonably possible.
 +
*If armor point values must be adjusted while the player is still alive (possibly with [[V9: Glossary#Damage|damaged]] armor), the damage to that location will persist through the equipment change. If the location had suffered 2 damage, the new total will also suffer 2 damage. If the location had zero points remaining, it will always stay at zero even if the new armor pieces increases the maximum point value. If the entire hit location is replaced with new armor that has not been worn during that life, then the current armor value may be [[V9: Glossary#Restored|restored]] to maximum value.
 +
{{V9 Example|text=''Example 1: Delilah is wearing a bracer and gambeson that grants her a total of 4 points on her arm. She suffers 1 damage which reduces her remaining armor points to 3. For whatever reason, she discovers she needs to get rid of the bracer. Her new armor averages to only 2 points so she sets her new maximum to 2 and then applies the 1 damage she has already received, leaving her with 1 point remaining on her arm.''
 +
''Example 2: Robin is wearing a 2pt leather chestpiece on their torso. They suffer damage and are reduced to 0pts remaining. They are then given a 5pt breastplate mid-combat. They remove the leather and put on the breastplate. Since they completely replaced the armor on their torso with new pieces, the don't have to carry over the damage and they can benefit from the full 5pts immediately. If they had some other piece on their torso that didn't get changed out, their maximum would still increase to 5pts but their current value would remain at zero.''}}</li></ol></div></div>
  
See the [[V9: Armor Construction| Armor Construction]] section for details about how to craft and calculate armor points.
+
<div class="toccolours mw-collapsible">
  
Worn Armor only protects what it covers. If you have armor on your arm but have a gap on your elbow and are struck in that gap, you are wounded but do not lose any Armor Points.
+
====<u><big>Construction Rules</u></big>====
 +
<div class="mw-collapsible-content">
 +
<ol><li>Must adhere to the [[V9: Universal Equipment Requirements| Universal Equipment Requirements]].</li>
 +
<li>Must not be easily mistaken as regular garb, nor be obviously synthetic in appearance, even if obscured or otherwise covered.</li>
 +
<li>Easily damaged materials (such as paper, cardboard, and tinfoil) and obviously modern materials (such as shin pads and chest pads) may never be considered armor on their own. Such materials and items may be used as components of armor but the final product must still meet all other requirements and construction standards in order to receive an Armor Point Rating.</li>
 +
<li>Armor that does not deform locally when struck must ensure all exposed corners are at least penny round (3/8" radius).
 +
*[[V9: Light Scale|Loose scales]] and similar components that move individually as part of piece that deforms locally do not need to be penny round.
 +
*[[V9: Heavy Scale|Rigid scales]] and similar components that are firmly affixed onto a shell must only be rounded if they protrude from the armor.
 +
</li>
 +
</ol>
  
Straps and other such material that hold the armor pieces on do not count as part of the armor unless they are specifically built to be as such.
+
<u><big>'''To Build or to Buy?'''</big></u><br>
{{V9 Example|text=A leather strap across your back holding on your breastplate will not protect you from hits.}}
+
Armor construction is a lot more complex than [[V9: Weapons|weapon]] construction. This [[V9: Full Rulebook|rulebook]] simply cannot provide all the information required to teach a novice how to build their own armor. We recommend taking the time to learn from experienced players or studying online tutorials and guides.
  
Armor Priority
+
Alternatively, you can simply purchase pre-made armor from other players or online vendors. If you wish to take this route, make sure to do your research and ensure it will meet all the requirements necessary for Amtgard armor. Once again, we recommend taking the time to speak with experienced players or studying online discussions.
 +
<br><br>
  
If a [[V9: Valid Strikes|strike]] hits both an armored area and an exposed area at the same time, the strike will count as hitting the armored area as long as it has at least 1 [[V9: AP|armor point]] remaining. In other words, if a player wants to strike a gap in armor, their attack must cleanly hit inside the gap without touching any physical armor. Armor Priority is superseded by [[V9: Torso Priority| Torso Priority]] when applicable.
+
[[File:V8 border axe hammer.png | center | 800px]]</div></div>
 
 
 
 
 
 
Worn Armor Limits
 
 
 
The maximum amount of [[V9: Armor Points| Armor Points]] a player can ever receive from [[V9: Worn Armor| Worn Armor]] in [[V9: What Is Amtgard?|Amtgard]] is six (6). Some game types, such as [[V9: Class| Class]] [[V9: Game Modes|battles]], will further limit this amount. In all cases, armor point values are reduced to their allowed maximum value after averaging and any other post-averaging modifiers, such as [[V9: Armor Rating Modifiers| Helms]]. [[V9: Natural Armor| Natural Armor]] and [[V9: Magic Armor| Magic Armor]] are unaffected by these limits.
 
{{V9 Example|text=''Example:''<br>Ariq is playing a class which is limited to 3 armor points maximum for a class game. He is wearing [[V9: Armor|armor]] that grants him 4 points on his torso, 2 points on his arms, and 1 point on his legs. Since his class has an armor limit of 3 points, Ariq's torso armor is reduced to 3 points for the duration of that game. His arm and leg values are unchanged.}}
 
 
 
 
 
 
 
Worn Armor Visibility
 
 
 
All [[V9: Worn Armor| Worn Armor]] pieces must be at least partially visible in a way that does not misrepresent the wearer’s potential [[V9: AP|armor point value]] and/or coverage when observed by another player. (see [[V9: Honor System|HSR #2]])
 
 
 
 
 
 
 
Adding/Removing Worn Armor During a Game
 
If it is necessary to add or remove pieces of [[V9: Worn Armor| Worn Armor]] after a game has started, the new [[V9: AP|Armor Point Values]] should be recalculated and adjusted as soon as reasonably possible. (see the [[V9: Equipment - Construction for details about how to calculate armor points]])
 
 
 
If armor point values are adjusted while the player is still alive, their maximum and current values are adjusted equally. If the current value is 0 and a piece is added, the armor point value only increases if it is a completely fresh piece of armor that has not been previously worn that life.
 
</div></div><br>
 
 
 
----
 
 
{{:V9: Rating Armor}}
 
{{:V9: Rating Armor}}
<br>
 
 
----
 
{{:V9: Universal Armor Rules (Construction)}}
 
<br>
 
 
----
 
 
{{:V9: Armor Styles}}
 
{{:V9: Armor Styles}}
 
</div></div></onlyinclude><br><br>
 
</div></div></onlyinclude><br><br>
{{V9 Universal Armor Rules (Gameplay)}}
+
{{V9 Physical Armor}}

Latest revision as of 07:21, 13 January 2024

221202---V9-Rules-Seal-for-Wiki.png
This page is part of the Official Amtgard V9 Alpha-Playtest Rulebook.
  • The Amtwiki is the official home and primary source for Amtgard V9 Rules as of February 25, 2023.
  • These rules are currently in Open Alpha Playtest. See the Playtest Disclaimer for more details.
  • To learn more about Amtgard V9 Development, please visit Amtgard.com.
  • To view the current Amtgard V8 ruleset, please see the Amtgard V8 Rulebook.




Physical Armor

Gameplay Rules

  1. Physical Armor is represented on a player by actual pieces armor worn by the player.
  2. Each physical piece is inspected and given an individual Armor Rating which is used to calculate the armor point total for each Hit Location.
  3. The maximum amount of armor points a Hit Location can ever receive from Physical Armor is six (6). Some Classes will limit this amount further.
    • Limits are only applied after armor point totals are fully calculated. Armor Ratings higher than 6 may be used to benefit averaging calculations before the limit is applied.
    Example: Ariq is playing a class which has a maximum armor point total of 4pts. He is wearing armor pieces that average to 6 points on his torso, 2 points on his arms, and 1 point on his legs. Since his class has an armor limit of 4 points, Ariq's torso armor is reduced to 4 points for the duration of that game and his arm and leg values remain unchanged.
  4. When worn, armor pieces must be at least partially visible in a way that does not misrepresent the wearer’s potential armor point totals and/or coverage.
  5. If it is necessary to add or remove pieces of physical armor after a game has started, new armor point totals should be recalculated and adjusted as soon as reasonably possible.
    • If armor point values must be adjusted while the player is still alive (possibly with damaged armor), the damage to that location will persist through the equipment change. If the location had suffered 2 damage, the new total will also suffer 2 damage. If the location had zero points remaining, it will always stay at zero even if the new armor pieces increases the maximum point value. If the entire hit location is replaced with new armor that has not been worn during that life, then the current armor value may be restored to maximum value.
    Example 1: Delilah is wearing a bracer and gambeson that grants her a total of 4 points on her arm. She suffers 1 damage which reduces her remaining armor points to 3. For whatever reason, she discovers she needs to get rid of the bracer. Her new armor averages to only 2 points so she sets her new maximum to 2 and then applies the 1 damage she has already received, leaving her with 1 point remaining on her arm. Example 2: Robin is wearing a 2pt leather chestpiece on their torso. They suffer damage and are reduced to 0pts remaining. They are then given a 5pt breastplate mid-combat. They remove the leather and put on the breastplate. Since they completely replaced the armor on their torso with new pieces, the don't have to carry over the damage and they can benefit from the full 5pts immediately. If they had some other piece on their torso that didn't get changed out, their maximum would still increase to 5pts but their current value would remain at zero.

Construction Rules

  1. Must adhere to the Universal Equipment Requirements.
  2. Must not be easily mistaken as regular garb, nor be obviously synthetic in appearance, even if obscured or otherwise covered.
  3. Easily damaged materials (such as paper, cardboard, and tinfoil) and obviously modern materials (such as shin pads and chest pads) may never be considered armor on their own. Such materials and items may be used as components of armor but the final product must still meet all other requirements and construction standards in order to receive an Armor Point Rating.
  4. Armor that does not deform locally when struck must ensure all exposed corners are at least penny round (3/8" radius).
    • Loose scales and similar components that move individually as part of piece that deforms locally do not need to be penny round.
    • Rigid scales and similar components that are firmly affixed onto a shell must only be rounded if they protrude from the armor.

To Build or to Buy?
Armor construction is a lot more complex than weapon construction. This rulebook simply cannot provide all the information required to teach a novice how to build their own armor. We recommend taking the time to learn from experienced players or studying online tutorials and guides.

Alternatively, you can simply purchase pre-made armor from other players or online vendors. If you wish to take this route, make sure to do your research and ensure it will meet all the requirements necessary for Amtgard armor. Once again, we recommend taking the time to speak with experienced players or studying online discussions.

V8 border axe hammer.png

Rating Armor & Calculating Armor Point Totals

Rating Armor Pieces

Each piece of Physical Armor must be inspected and given an Armor Rating in order to be used for Amtgard combat.

  1. Physical Armor pieces must be examined and rated by an Equipment Inspector.
  2. Each piece of physical armor will be assigned to an Armor Tier based on its style that will outline its Base Armor Rating and Maximum Armor Rating. Armor that cannot be assigned to a tier does not count as armor and cannot be used as such.
  3. Pieces can be granted bonuses or penalties based on the quality of construction or appearance.
    • The sum total of all modifiers cannot increase a piece's armor rating beyond the maxiumum allowable for its tier. Surplus bonuses confer no additional benefit.
    • Armor with a final rating of zero or less (due to penalties) does not count as Armor and cannot be used as such.
  4. Armor Pieces are rated individually but will be averaged together when worn to produce an Armor Point Total for each Hit Location.
PRO TIP: EQUIPMENT REFERENCE SHEETS
Armor rating can be subjective at times. To help mitigate this, it is recommended that players keep a reference sheet with a list of details for their physical armor pieces including descriptions, construction details, and previously assigned ratings to help Inspectors make quick and confident assessments. Keeping signatures and inspection dates from other Inspectors will add further credibility to your notes.

Reference Sheets are not necessary but they will greatly improve your odds of getting consistent armor ratings at every event you attend!


Armor Tiers

Armor tiers provide a base and maximum rating for physical armor pieces. Each tier includes a list of common styles that fall under that tier. Ambiguous armor pieces should be placed wherever they would be most appropriate.

ARMOR TIERS
TIER BASE
RATING
MAX
RATING
INCLUDES
T1 1 2
T2 2 3
T3 3 4
T4 4 5
T5 5 6
T6 6 7
Special - -




Armor Modifiers

Armor pieces can be granted bonuses or penalties to their Armor Rating based on the quality of construction or appearance. Multiple points can be awarded and penalized simultaneously as long as they each correspond to each unique feature or collection of features that would warrant the bonus or penalty if viewed on its own.

Superior Appearance
Bonus points may be awarded to armor that displays an exceptional appearance above and beyond the typical appearance of similar pieces in its style. This includes but is not limited to: tooling, etching, gilding, and fluting, as well as notable use of colors, shapes, weaves, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base construction requirements to create an aesthetically pleasing piece.

Inferior Appearance
Points may be deducted from armor that displays an appearance well below the typical standard expected for similar pieces in that style. Examples include tarnished/poorly-maintained armor as well as visibly inauthentic or degraded materials. This penalty does not apply when the piece is worn as a part of a complete outfit that is intentionally designed to look shoddy or battle-worn.

Superior Construction
Bonus points may be awarded to armor constructed with exceptional techniques that provide a meaningful increase in durability over the standard for the material being used. This includes but is not limited to: solid/riveted rings, hardened material, noticeably tighter spacing than required, etc. These examples do not represent an exhaustive list and consideration should be given to any piece that obviously goes above and beyond the base requirements to create a more durable piece. This bonus may also be granted to pieces that are at least 75% constructed from metal materials that are significantly more dense and/or durable than aluminum.

Inferior Construction
Points may be deducted from armor for inferior construction techniques or a meaningful reduction in expected durability when compared to the standard for the material being used. Examples include but are not limited to: obviously unfinished armor, brittle/cracked material, loose connection points, and shoddy workmanship.

Layered Armor Bonus
If multiple unique pieces of Physical Armor are layered on top of each other as part of a complete outfit, the rating of any overlapping area will be rating of the highest-tier armor piece plus 1, up to that armor’s maximum.

  1. A piece of armor already at max rating will not receive any additional value from layering.
  2. Each layered piece should be able to act as armor on its own if it were not layered. The layers may be affixed while being worn, such as metal armor attached to an arming doublet.
  3. Any part of layered armor that extends beyond the layering is calculated at its normal rating.
  4. All layered armor pieces must be at least partially visible in a way that does not misrepresent the wearer’s armor point total or armor coverage when observed by another player from 20ft away. This especially true in the cases where a lower-tier armor is layered on top of a higher-tier piece.
  5. There is no additional bonus for layering more than two pieces.


Material Thickness

Certain armor styles may require materials that meet a specific thickness. Multiple layers of material may permanently affixed to each other to increase thickness however extra thickness caused by adhesives or empty space should not be factored into the new measurements.


MATERIAL THICKNESS REFERENCE CHART
Inferior
(Minimum)
Standard Superior Notes
Cloth Cannot be less
than standard
1/16"
1.60mm
1/8"
3.18mm
Light Leather 4oz
1/16"
1.60mm
6oz
3/32"
2.39mm
8oz
1/8"
3.18mm
Heavy Leather Cannot be less
than standard
10oz
5/32"
3.96mm
12oz
3/16"
4.78mm
Less than standard
is Light Leather
Rigid, Non-Metal 1/8"
3.18mm
3/16"
4.78mm
1/4"
6.36mm
Material Density
at least 0.9g/cm3
(equivalent to HDPE)
Aluminum Steel Aluminum Steel Aluminum Steel
Round Rings 18ga swg
16ga awg
0.048"
1.219mm
20ga swg
18ga awg
0.036"
0.914mm
16ga swg
14ga awg
0.064"
1.626mm
18ga swg
16ga awg
0.048"
1.219mm
14ga swg
12ga awg
0.080"
2.032mm
16ga swg
14ga awg
0.064"
1.626mm
Flat Rings 20ga swg
18ga awg
0.036"
0.914mm
22ga swg
20ga awg
0.028"
0.711mm
18ga swg
16ga awg
0.048"
1.219mm
20ga swg
18ga awg
0.036"
0.914mm
16ga swg
14ga awg
0.064"
1.626mm
18ga swg
16ga awg
0.048"
1.219mm
Measure along thinnest axis.

Punched rings should be comparable thickness.
Sheet Metal 18ga
0.040"
1.024mm
20ga
0.036"
0.911mm
16ga
0.051"
1.291mm
18ga
0.048"
1.214mm
14ga
0.064"
1.628mm
16ga
0.060
1.518mm
Scales 20ga
0.032"
0.812mm
22ga
0.030"
0.759mm
18ga
0.040"
1.024mm
20ga
0.036"
0.911mm
16ga
0.051"
1.291mm
18ga
0.048"
1.214mm




Supplemental Armor Bonus
Player with Supplemental Armor

When calculating a player's Armor Point Total, armor worn on the head (above the neck), hands (above the wrist), or feet (below the ankle) do not contribute a normal rating towards calculations. Instead, pieces that meet the construction criteria below grant an additional +1 bonus to their respective location (torso, right arm, left arm, right leg, left leg) after all Armor Point Totals have been calculated.

  1. Supplemental armor pieces must cover at least 50% of the surface area of the head, hand, or foot, not including space between fingers and toes.
  2. They meet the Universal Equipment Requirements, as well as be constructed in a way that would place them in Tier 3 or greater.
    • To ensure safety in the cases of accidental hand contact, hand armor cannot include metal or similarly rigid materials on the tops of knuckles or fingers, including fingertips. To offset this, Hand Armor can also be constructed as a Tier 2 armor so long as the final piece still looks like armor.
  3. This bonus can cause the armor point total to exceed tier maximums, however it will still be affected by armor point limits imposed by class or game modes.
  4. If hand or foot armor is the only armor piece worn on that location, then it should be compared to the normal armor tiers and assigned a normal rating as best as possible.



Calculating Armor Point Totals

Once the pieces are rated, Armor Point Totals are calculated for each Hit Location based on those ratings and the approximate physical coverage that each piece bestows.

To calculate this total, average the ratings of all physical armor pieces in the hit location based on the percentage of coverage they provide, rounding the result to the nearest whole number.

  • Areas not covered by any armor whatsoever, such as gaps or garb, are not factored into this averaging.
  • You do not need to be precise when determining the coverage. "Eyeballing" it is perfectly fine and is even encouraged as long as it is done in good faith.

Once the point total has been calculated, any extra points from Supplemental Armor should be added.

Example: Padded Bracer, Chainmail Sleeve, and Gauntlets.

Lorathana is wearing a cloth bracer (rated 2pts) on her right forearm, a chainmail tunic (rated 4pts) with sleeves covering some of her arms, and a leather gauntlet. The two pieces together cover about 70% of her arms, leaving a gap at the elbow.

To make their calculations, the Equipment Inspector only has to focus on the area covered by armor. Looking at her arm, they determine that the bracer takes up about 40% of the armored area and the chainmail sleeve takes up about 60% of the armored area. The Gauntlets are Supplemental Armor so they are ignored until later.

[Bracer] 2pts x 40% = 2 x 0.40 = 0.8
[Sleeve] 4pts x 60% = 4 x 0.60 = 2.4
0.8 + 2.4 = 3.2 rounds down to 3.

Now that the total has been calculated, Lorathana can add the Supplemental Armor bonus for her Gauntlets, granting an additional +1.

Therefore, Lorathana’s right arm has an Armor Point Total of 4pts in the areas covered by armor (the bracer, the sleeve, and the gauntlets) and an exposed gap between them.

Still confused? More examples can be found here.


V8 border axe hammer.png

Armor Styles

Each Armor Tier includes a list of common Armor Styles that fall under that tier. Those styles are presented here in greater detail to help players and inspectors more accurately assess their armor. Ambiguous armor pieces should be assessed on a case-by-case basis.

ARMOR TIERS
TIER BASE
RATING
MAX
RATING
INCLUDES
T1 1 2
T2 2 3
T3 3 4
T4 4 5
T5 5 6
T6 6 7
Special - -





Cloth/Padded Armor
Placeholder Example

This style includes armor made of fabric, padding, and/or synthetic equivalents.


Light Leather
Placeholder Example

This style includes armor made of thin leather, hides, furs and their synthetic equivalents.


Butcher's Mail, Sharkmail, etc
Placeholder Example

This style includes armor composed of machine-made weaves of very small rings.

  • Is a Tier 2 armor style.
  • Must meet the Universal Equipment Requirements.
  • Only welded Butcher's Mail, Sharkmail, Ringmesh, or similar chain mesh may be used. Because of this, there are no specific Material Thickness requirements or modifiers.
  • Any weave is permitted but it must not allow a 1/8" dowel to pass through
  • Does not gain a bonus for being made from Steel or similar metal.


Heavy Leather
Placeholder Example

This style includes armor made of thick leather, hides, furs and their synthetic equivalents.


Rigid Non-Metal Armor
Placeholder Example

This style includes all predominantly rigid non-metal armor that would fall under Tiers 4/5/6 if they were made from metal.


Chainmail
Placeholder Example

This style includes flexible armor consisting of a weave of interlocked metal rings.

  • Is a Tier 3 armor style.
  • Must meet the Universal Equipment Requirements.
  • Any weave is permitted but it must not allow a 1/2" dowel to pass through.
  • Rings must have Aspect Ratio (AR) of 8 or less.
  • Metal must be at least equivalent to Aluminum in density and durability. (2.7g/cm3)
  • The standard Material Thickness for rings is based on the metal used:
    • Aluminum Round Rings: 16ga swg (0.064") (1.626mm)
    • Aluminum Flat Rings: 18ga swg (0.048") (1.219mm)
    • Steel Round Rings: 18ga swg (0.048") (1.219mm)
    • Steel Flat Rings: 20ga swg (0.036") (0.914mm)


Light Scale
Placeholder Example

This style includes armor created with overlapping scales secured to each other along one edge using rings or a flexible backing. Scales are individually mobile and are not held into firm contact with the others. Scale armor with rigid or immobile scales is classified as Heavy Scale.

  • Is a Tier 4 armor style.
  • Must meet the Universal Equipment Requirements.
  • Scales must overlap by at least 10%.
  • Any backing material must not be visible through the scales.
  • Scales must be a metal at least equivalent to Aluminum in density and durability. (2.7g/cm3)
  • The standard for Material Thickness is based on the metal used:
    • Aluminum Scales: 18ga (0.040") (1.024mm)
    • Steel Scales: 20ga (0.036") (0.911mm)
    • For rings and backing materials, consult the Material Thickness chart.


Heavy Scale
Placeholder Example

This style includes armor created with overlapping scales secured to each other along one edge against a backing to create a rigid shell rather than individually mobile scales. Scale armor with loose scales is classified as Light Scale.

  • Is a Tier 5 armor style.
  • Must meet the Universal Equipment Requirements.
  • Scales must overlap by at least 10%.
  • The backing material must not be visible through the scales.
  • Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
  • The standard for Material Thickness is based on the metal used:
    • Aluminum Scales: 18ga (0.040") (1.024mm)
    • Steel Scales: 20ga (0.036") (0.911mm)
    • For rings and backing materials, consult the Material Thickness chart.


Butted Plate (Splint, Kikko, etc.)
Placeholder Example

This style includes armor that consists of numerous metal plates attached to a backing or linked by cord, chain, or by some other method. This armor is often flexible with numerous seams and joints between plates. This armor will deform locally when struck rather than spreading out impact over a large area

  • Is a Tier 5 armor style.
  • Must meet the Universal Equipment Requirements.
  • Plates spaced no more than 0.5" apart.
  • Plates must cover at least 75% of the armor.
  • Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
  • The standard for Material Thickness is based on the metal used:
    • Aluminum Plates: 16ga (0.051") (1.291mm)
    • Steel Plates: 18ga (0.048") (1.214mm)
    • For rings and backing materials, consult the Material Thickness chart.


Lamellar and Laminar
Placeholder Example

This style includes armor that is constructed from numerous metal plates, connected to each other in an overlapping fashion by cord, chain link, or similar methods. Examples may include lorica segmentata, manica, okegawa-dō, anima, and other styles. Unlike Heavy Scale, the plates of this type of armor are firmly connected to each other. Mobility is provided by the small amount of flex and slack in the attachment between the individual plates.

  • Is a Tier 6 armor style.
  • Must meet the Universal Equipment Requirements.
  • Plates must overlap by at least 10%.
  • Plates connect directly to each other without any backing for support.
  • Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
  • The standard for Material Thickness is based on the metal used:
    • Aluminum Plates: 16ga (0.051") (1.291mm)
    • Steel Plates: 18ga (0.048") (1.214mm)


Brigandine
Placeholder Example

This style includes armor that is constructed from numerous shaped and fitted metal plates solidly connected along a supporting shell of heavy cloth (such as canvas, denim, or velvet) in such a way that when worn all plates are held together firmly and follow the general contours of the body. The plates are typically placed on the inside of the shell, presenting only fabric and rivets to the observer for a very clean and customizable appearance.

  • Is a Tier 6 armor style.
  • Must meet the Universal Equipment Requirements.
  • 75% of plates must overlap by at least 10% of their surface.
  • Plates need only be attached along one edge but must be held firmly against each other when the armor is worn.
  • Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
  • The standard for Material Thickness is based on the metal used:
    • Aluminum Plates: 16ga (0.051") (1.291mm)
    • Steel Plates: 18ga (0.048") (1.214mm)


Plate
Placeholder Example

This style includes armor is constructed from large pieces of metal connected together to form a solid shell that spreads impact over a large surface area. Plate armor will not deform locally when struck, and will instead behave as a single contiguous whole. The individual metal pieces are shaped and fitted to articulate together and follow the contours of the body.

  • Is a Tier 6 armor style.
  • Must meet the Universal Equipment Requirements.
  • 75% of the plates used must be large enough to cover at least 10% of the full Hit Location. Joint articulations are exempt from this requirement.
  • Metal must at least equivalent to Aluminum in density and durability. (2.7g/cm3)
  • The standard for Material Thickness is based on the metal used:
    • Aluminum Plates: 16ga (0.051") (1.291mm)
    • Steel Plates: 18ga (0.048") (1.214mm)


Ambiguous Armor
Placeholder Example

For armor pieces that are ambiguous, the equipment inspector should compare it to each tier as a whole and do their best assign to the tier they feel is most appropriate based on factors such as materials, weight, flexibility, and visuals (see guide below).

Below is a simple guide that inspectors may use to gauge the best tier for an ambiguous piece of armor. Use this knowledge alongside existing styles to help place the armor in a tier that is fair for everyone.

  1. Non-Metal Tier Cap: Non-metal armors should not be placed higher than Tier 3, regardless of the factors below.
  2. Weight: Heavier armor should be placed higher, but only to a limit. The lowest tier armors are quilted cloth (0.03 lbs/sqft) and the highest tier armors are 14ga aluminum plate (approx. 1 lbs/sqft). Extra weight beyond these bounds should receive no additional consideration, however steel-like materials may receive a separate construction bonus afterwards. Weight added for no reason other than to add weight should likewise be disregarded.
  3. Flexibility: The more rigid the armor is, the higher it should be placed. The lowest tier armors are fabric and the highest tier armors are reinforced metal plates.
  4. Tiebreaker - Visuals: If there is difficulty deciding between two tiers, visual appearance can act as a tiebreaker to nudge the decision one way or the other.
  5. Helpful Benchmarks: Consider using these benchmarks to help peg an initial placement and then fine tune it using the other criteria above.
    • Ambiguous armor that meets the universal equipment requirements is always eligible for Tier 1 at minimum.
    • Ambiguous armor that is primarily rigid and non-metal should be placed roughly around Tier 2 or Tier 3.
    • Ambiguous armor that is primarily metal and primarily rigid should be placed roughly around Tier 4 or Tier 5.

Note to Players: Buying or crafting ambiguous armor pieces can make your ratings inconsistent. To help mitigate this, consider keeping an Equipment Reference Sheet to help inspectors view previously assigned ratings so they can make quick and confident assessments. Keeping signatures and inspection dates from other Inspectors will add further credibility and stability to your ratings.



V8 border axe hammer.png



Physical Armor
Gameplay Rules · Construction Rules · Rating Armor & Calculating Armor Points · Armor Styles
Armor
General Rules · Natural Armor · Physical Armor
Equipment
Equipment Basics · Equipment Use Terms · Weapons · Shields · Armor · Color Code · Visual Indicators
Amtgard V9 Rulebook
Playtest Disclaimer · Introduction · Getting Started · Garb · Honor System · Safety · Core Combat Rules · Equipment · Classes · Abilities and Effects · Magic Items · Combat Activities · Rules Authorities
Appendix: Equipment Inspection Guide · Master List of Abilities · Glossary