Polyethylene Plank Foam

From AmtWiki
Revision as of 00:09, 25 November 2012 by Lumpy!! (talk | contribs)

A type of foam used to make most foam shields. Sir Clalibus of henceforth once compiled a list of all known distributors and placed the list on E-Sam though the pricing may not be up to date it is still a valuable resource. The list is as follows:

Contents

Buckley/Polyplastics (clalibus's):Wichita, KS/austin, TX

http://www.buckleyind.com
1-800-835-2779
density = 2.2 laminated
48" x 108" x 2" = $70
48" x 108" x 1" = pending (just for clark)
density = 1.7
48" x 108" x 2" =was $39.68 now $57.60 not sure what happened there maybe plank versus lam?


Wisconsin Foam Products, madison, wi (zebidark's)

http://www.wifoam.com
800-989-3626
density = 2.2
48" x 108" x 2" = pending
density = 1.7 laminant
48" x 108" x 2" = $53


Clark Foam , Bolingbrook, Illinois

http://www.clarkfoam.net/prods.asp
888.284.2290 (nicest call of the day)
density = 2.2
48" x 108" x 2" = $72.00
density = 1.8
48" x 108" x 2" = $58.00


B.B. Bradley Company (rakhir's), Painesville & columbus, OH

http://www.bbbradley.com
1-800-637-8623
density = 2.2 laminated
48" x 108" x 2" =$72.00(2 plank minimum)
density = 1.7
48" x 108" x 2" =$62.00(2 plank minimum)


Fitz's Place?

density = 2.2
48" x 108" x 2" = $78
1.7
48" x 108" x 2" = $75


Foam Fabricators, Troy, MI

http://www.foamforyou.com/polyethlene_planks.htm
(248) 284-0002
density = 2.3
48" x 108" x 2" = $81.20 (not available, price just for reference)
24" x 108" x 2" = $ 40.60
24" x 54" x 2" = $ 20.50


San Antonio Foam Fabricators

density = 2.2
48" x 108" x 2" = $88.00


Kirkland Sales, Garland, Texas

972-864-1424 (who put me on hold for a considerable amount of time and obviously had to look up where they got it from and then add markup while i was not on hold (but from where?))
density 2.2 laminated
48" x 108" x 2" = $91.25


Foam Factory, Clinton Twp., MI

http://www.foambymail.com/Polyethylene.html
density = 1.8 - 2.2
48" x 108" x 2" = $146.99 (pick up only)
24" x 108" x 2" = $73.99 (pick up only)
54" x 24" x 2" = $37.99 (will ship)


Foam Order, san fransisco, ca

(859) 971-2531 (i know they outsource orders but i don't know to whom)
density = unknown
48" x 108" x 2" = $291.60 (not available, price just for reference)
40" x 80" x 2" = $180(they want to cut it into a 4 square foot shape to save on shipping, free shipping over $1200)


american micro industries, chambersburg, pa

also supplies american team group and polyethelene foam. net
800.558.2058
density = 1.7
48" x 108" x 2" = $806.49 for one sheet(not available, price just for reference)
48" x 24" x 2"= $179.22 down to $146.76 bulk of 50


American Foam Products, PAINESVILLE, OH

440.352.3434
48" x 108" x 2" = pending
24" x 108" x 2" = pending
they also have the differing laminations (6#to 1.7or2.2# but i don't really recomend it)


Dow

after much searching i have dow's number and an estimate in : 1-800-441-4369 dow ethafoam220 2*48*108 apx 50 sheets, they have regional fabricators so technically this should be accesable to everyone to some degree or another depending on their prices
Midland, MI
989-636-1000


Sealed Air

(giving me the runarround a little, i'll get there)
this type is done in Grand Prairie, TX (but they have places everywhere so shipping might be avoidable)
1-866-795-3028
right now i'm on the phone with randy ochoa 214-908-0188 (please don't call him is a place holder for me and would probably piss the redneck off)
density 2.2 stratocell (plank)
48" x 108" x 2" = pending
density 2.2 celluplank (laminated)
48" x 108" x 2" = pending
density 1.7 stratocell (plank)
48" x 108" x 2" = pending
density 1.7 celluplank (laminated)
48" x 108" x 2" = pending


E.N. Murray Fabricators, denver, co

1-800-821-0659
density = 2.2
48" x 108" x 2" = $pending
density = 1.7
48" x 108" x 2" = $pending


Western Industries Corp

oklahoma city, ok (405)419-3100
austin, tx (512) 832-1197
reynosa 011 52 899 958 1177
https://www.wic-store.com/
produces for Authorized Worldwide Seagate and IBm
density = 2.2
48" x 108" x 2" = $pending
1.7
48" x 108" x 2" = $pending


General Packaging Corp

http://www.gpctexas.com/index.htm
Richardson TX,972-234-5499
east Dallas, 214-821-1476
conroe
brownsville, 956-541-3155
works with sealed air, haven't tried them yet, figure they are the one sealed air will send to me


SCA Packaging North America

New Brighton, PA+ 11 other branches us wide
http://www.scapackagingna.com/index.asp 800-289-9966
haven't tried them yet


Diversified Foam Products, Pennsauken, NJ

http://www.diversifiedfoam.com/default.html
Tel: 856-662-1981


Whyco Inc. Garland, TX

214-342-0993
there was so little on these folks it was silly, i'll try them tomorrow


Merryweather Foam Inc

http://www.merryweather.com/
Barberton, Ohio 330.753.0353
Sylacauga, Alabama main branch 256.249.8546
Anthony, New Mexico (el paso, tx)505.882.3550
try them tomorrow as well


Williams Foam, Sylmar, CA

http://www.williamsfoam.com/index.html
800.709.FOAM (3626)
again haven't tried these guys yet


Creative Packaging Tulsa, OK

http://www.creativepackagingok.com/
(918) 587-0347
no try afta' hours, punked out site yo
density = 2.2
48" x 108" x 2" = $pending
density = 1.7
48" x 108" x 2" = $pending


Norseman All Foam

http://www.allfoam.bc.ca/
Calgary, Alberta 1.888.808.8055
Langley, B.C.1.800.661.8073
(goes through dow, but would be very beneficial to canucks as shipping over the border sucks so much ass!


All Foam Products Company, Buffalo Grove, IL

http://www.allfoam.com
(800) 443-9967
density 2.2 plank
48" x 108" x 2" = pending
density 2.2 laminated
48" x 108" x 2" = pending
density 1.7 plank
48" x 108" x 2" = pending
density 1.7 laminated
48" x 108" x 2" = pending
note to self , i lied, i haven't called them yet


Atlas Foam Products Sylmar, CA

818-837-3626
they do it but have nothing netside, need to call 'em


Thomas G. Goldkamp, Inc., Ambler, PA

http://www.tgoldkamp.com/
(800) 535-7225
they use sealed air corp
density 2.2 stratocell (plank)
48" x 108" x 2" = pending
density 2.2 celluplank (laminated)
48" x 108" x 2" = pending
density 1.7 stratocell (plank)
48" x 108" x 2" = pending
density 1.7 celluplank (laminated)
48" x 108" x 2" = pending


Air-Works Inc. , Albuquerque, NM

Phone: 505-797-7155 they share a name with a major air line outfitter so i am having trouble attaining info

Just called they have 1", 2", and 3"

I only asked about the 2" its 48"x108" 1.7# and its $115.50 per sheet.

Custom Pack, Inc., Exton, PA

http://www.custompackinc.com/index.htm
800-722-7005


Die-Vac Plastics, Inc., Hialeah, FL

http://www.dievacplastics.com/index.htm
(305) 821-8872


Pak-Lite Inc, all over the south east
http://www.pliusa.com/
main office Suwanee, GA (770) 447-5123


Ntt Atwater, Spokane, WA

http://www.nottatwater.com/ 1-800-288-7278
i don't think they have what we need but the fuckers pop up everywhere i look


Southern-Star Packaging, Irvington, KY

270-547-5555
http://www.southernstarpackaging.net/
the site doesn't look like it has what they need but their corporate bio says they do


Foam Design

http://www.foamdesign.com/index.html
Lexington, KY (859) 231-7006 ext. 309
Durham, NC (919) 596-0668


Hibco Plastics, inc., Yadkinville, NC

http://www.hibco.com/
1-800-849-8683
uses dow industries


Nomaco Inc., Zebulon, NC

http://www.nomaco.com/
(800)345-7279


Orlando Products, Inc.Baltimore, Md

1-888-214-3748
http://www.orlandoproductsinc.com


Roger's Foam Corp, Somerville, MA

http://www.rogersfoamcorp.com/
(617) 623-3010


Creative Foam Corporation, Fenton, MI

810.629.4149
http://www.creativefoam.com/


American Flexible Products, Inc., Chaska MN

http://www.americanflexible.com/index.htm
952-368-4225


Maypack inc, Wayne, NJ

973-696-0780
http://www.maypakinc.com/foam.html


Nott Company, Arden Hills, MN

http://www.nottco.com/
main office (651) 415-3400


Technifab, Avon, Ohio

http://www.technifabfoam.com/home.html
(440) 934-8324


American Converters, Inc. (amcon) , Minneapolis, MN

888.360.8050
http://www.amconvas.com/contacts.html


Lamatek, West Deptford, NJ

http://www.lamatek.com/index.shtml
(800) 526-2835
(not sure they do what we need, they do the rolls and not the full plank and or laminated i won't be calling them back though as the receptionist told me i had to go as my end of the phone had static on it; i asked her a couple more questions and she answered with no problem, fuck you you new jersey trash bitch)


Brock Composites, Boulder, CO

http://www.brockusa.com/index.html
has nothing that we use but definitely has neat shit . . .porous closed cell foams . . .i wonder how well it dissipates heat?
(877)276.2587

Advanced Packaging Specialties, Chandler, AZ

http://apsaz.com/index.jsp
(480) 635-8607
48" x 108" x 2", 2.2 lbs = $73.08