Polyethylene Plank Foam

=A type of foam used to make all foam shields. Sir Clalibus of henceforth once compiled a list of all known distributors and placed the list on E-Sam though the pricing may not be up to date it is still a valuable resource. The list is as follows:=

Arrow buckley/polyplastics (clalibus's):Wichita, KS/austin, tx www.buckleyind.com 1-800-835-2779 density = 2.2 laminated 48" x 108" x 2" = $70 48" x 108" x 1" = pending (just for clark) density = 1.7 48" x 108" x 2" =was $39.68 now $57.60 not sure what happened there maybe plank versus lam?

Arrow Wisconsin Foam Products, madison, wi (zebidark's): wifoam.com 800-989-3626 density = 2.2 48" x 108" x 2" = pending density = 1.7 laminant 48" x 108" x 2" = $53

Arrow clark foam , Bolingbrook, Illinois http://www.clarkfoam.net/prods.asp 888.284.2290 (nicest call of the day) density = 2.2 48" x 108" x 2" = $72.00 density = 1.8 48" x 108" x 2" = $58.00

Arrow B.B. Bradley Company (rakhir's), Painesville & columbus, OH http://www.bbbradley.com/ 1-800-637-8623 density = 2.2 laminated 48" x 108" x 2" =$72.00(2 plank minimum) density = 1.7 48" x 108" x 2" =$62.00(2 plank minimum)

Arrow fitz's place? density = 2.2 48" x 108" x 2" = $78 1.7 48" x 108" x 2" = $75

Arrow foam fabricators, Troy, MI http://www.foamforyou.com/polyethlene_planks.htm (248) 284-0002 density = 2.3 48" x 108" x 2" = $81.20 (not available, price just for reference) 24" x 108" x 2" = $ 40.60 24" x 54" x 2" = $ 20.50

Arrow san antonio foam fabricators density = 2.2 48" x 108" x 2" = $88.00

Arrow Kirkland Sales, Garland, Texas 972-864-1424 (who put me on hold for a considerable amount of time and obviously had to look up where they got it from and then add markup while i was not on hold (but from where?)) density 2.2 laminated 48" x 108" x 2" = $91.25

Arrow foam factory, Clinton Twp., MI http://www.foambymail.com/Polyethylene.html density = 1.8 - 2.2 48" x 108" x 2" = $146.99 (pick up only) 24" x 108" x 2" = $73.99 (pick up only) 54" x 24" x 2" = $37.99 (will ship)

Arrow foam order, san fransisco, ca (859) 971-2531 (i know they outsource orders but i don't know to whom) density = unknown 48" x 108" x 2" = $291.60 (not available, price just for reference) 40" x 80" x 2" = $180(they want to cut it into a 4 square foot shape to save on shipping, free shipping over $1200)

Arrow american micro industries, chambersburg, pa also supplies american team group and polyethelene foam. net 800.558.2058 density = 1.7 48" x 108" x 2" = $806.49 for one sheet(not available, price just for reference) 48" x 24" x 2"= $179.22 down to $146.76 bulk of 50

Arrow American foam products PAINESVILLE, OH 440.352.3434 48" x 108" x 2" = pending 24" x 108" x 2" = pending they also have the differing laminations (6#to 1.7or2.2# but i don't really recomend it)

Arrow after much searching i have dow's number and an estimate in : 1-800-441-4369 dow ethafoam220 2*48*108 apx 50 sheets, they have regional fabricators so technically this should be accesable to everyone to some degree or another depending on their prices Midland, MI 989-636-1000

Arrow sealed air (giving me the runarround a little, i'll get there) this type is done in Grand Prairie, TX (but they have places everywhere so shipping might be avoidable) 1-866-795-3028 right now i'm on the phone with randy ochoa 214-908-0188 (please don't call him is a place holder for me and would probably piss the redneck off) density 2.2 stratocell (plank) 48" x 108" x 2" = pending density 2.2 celluplank (laminated) 48" x 108" x 2" = pending density 1.7 stratocell (plank) 48" x 108" x 2" = pending density 1.7 celluplank (laminated) 48" x 108" x 2" = pending

Arrow e.n. murray fabricators, denver, co 1-800-821-0659 density = 2.2 48" x 108" x 2" = $pending density = 1.7 48" x 108" x 2" = $pending

Arrow western industries corp, oklahoma city, ok (405)419-3100 austin, tx (512) 832-1197 reynosa 011 52 899 958 1177 https://www.wic-store.com/ produces for Authorized Worldwide Seagate and IBm density = 2.2 48" x 108" x 2" = $pending 1.7 48" x 108" x 2" = $pending

general packaging corp, http://www.gpctexas.com/index.htm richrdson,972-234-5499 east dallas, 214-821-1476 conroe brownsville, 956-541-3155 works with sealed air, haven't tried them yet, figure they are the one sealed air will send to me

SCA Packaging North America, New Brighton, PA+ 11 other branches us wide http://www.scapackagingna.com/index.asp 800-289-9966 haven't tried them yet

diversified foam products, Pennsauken, NJ http://www.diversifiedfoam.com/default.html Tel: 856-662-1981

Whyco Inc. Garland, TX 214-342-0993 there was so little on these folks it was silly, i'll try them tomorrow

merryweather foam inc, http://www.merryweather.com/ Barberton, Ohio 330.753.0353 Sylacauga, Alabama main branch 256.249.8546 Anthony, New Mexico (el paso, tx)505.882.3550 try them tomorrow as well

williams foam, Sylmar, CA http://www.williamsfoam.com/index.html 800.709.FOAM (3626) again haven't tried these guys yet

creative packaging Tulsa, OK , http://www.creativepackagingok.com/ (918) 587-0347 no try afta' hourse, punked out site yo density = 2.2 48" x 108" x 2" = $pending density = 1.7 48" x 108" x 2" = $pending

norseman all foam http://www.allfoam.bc.ca/ Calgary, Alberta 1.888.808.8055 Langley, B.C.1.800.661.8073 (goes through dow, but would be very beneficial to canucks as shipping over the border sucks so much ass!

all foam products company Buffalo Grove, Illinois www.allfoam.com (800) 443-9967 density 2.2 plank 48" x 108" x 2" = pending density 2.2 laminated 48" x 108" x 2" = pending density 1.7 plank 48" x 108" x 2" = pending density 1.7 laminated 48" x 108" x 2" = pending note to self , i lied, i haven't called them yet

Atlas Foam Products Sylmar, CA 818-837-3626 they do it but have nothing netside, need to call 'em

Thomas G. Goldkamp, Inc., Ambler, PA http://www.tgoldkamp.com/ (800) 535-7225 they use sealed air corp density 2.2 stratocell (plank) 48" x 108" x 2" = pending density 2.2 celluplank (laminated) 48" x 108" x 2" = pending density 1.7 stratocell (plank) 48" x 108" x 2" = pending density 1.7 celluplank (laminated) 48" x 108" x 2" = pending

Air-Works Inc. , Albuquerque, NM Phone: 505-797-7155 they share a name with a major air line outfitter so i am having trouble attaining info

Custom Pack, Inc., Exton, PA http://www.custompackinc.com/index.htm 800-722-7005

Die-Vac Plastics, Inc., Hialeah, FL http://www.dievacplastics.com/index.htm (305) 821-8872

pak-lite inc, all over the south east http://www.pliusa.com/ main office Suwanee, GA (770) 447-5123

nott atwater, Spokane, WA http://www.nottatwater.com/ 1-800-288-7278 i don't think they have what we need but the fuckers pop up everywhere i look

Southern-Star Packaging, Irvington, KY 270-547-5555 http://www.southernstarpackaging.net/ the site doesn't look like it has what they need but their corporate bio says they do

foam design http://www.foamdesign.com/index.html Lexington, KY (859) 231-7006 ext. 309 Durham, NC (919) 596-0668

Hibco Plastics, inc., Yadkinville, NC http://www.hibco.com/ 1-800-849-8683 uses dow industries

Nomaco Inc., Zebulon, NC http://www.nomaco.com/ (800)345-7279

Orlando Products, Inc.Baltimore, Md 1-888-214-3748 http://www.orlandoproductsinc.com

roger's foam corp, Somerville, MA http://www.rogersfoamcorp.com/ (617) 623-3010

Creative Foam Corporation, Fenton, MI 810.629.4149 http://www.creativefoam.com/

American Flexible Products, Inc., Chaska MN http://www.americanflexible.com/index.htm 952-368-4225

maypack inc, Wayne, NJ 973-696-0780 http://www.maypakinc.com/foam.html

nott company, Arden Hills, MN http://www.nottco.com/ main office (651) 415-3400

technifab, Avon, Ohio http://www.technifabfoam.com/home.html (440) 934-8324

American Converters, Inc. (amcon) , Minneapolis, MN 888.360.8050 http://www.amconvas.com/contacts.html

Arrow Lamatek, West Deptford, NJ [url]http://www.lamatek.com/index.shtml [/url] (800) 526-2835 (not sure they do what we need , they do the rolls and not the full plank and or laminated i won't be calling them back though as the receptionist told me i had to go as my end of the phone had static on it; i asked her a couple more questions and she answered with no problem, fuck you you new jersey trash bitch)

brock composites http://www.brockusa.com/index.html has nothing that we use but definitely has neat shit . . .porous closed cell foams . . .i wonder how well it disipates heat? Boulder, CO (877)276.2587